Interior Walls definition

Interior Walls. Interior paint to be flat latex on walls, one (1) coat primer, one (1) finish coat. All colors to match existing. General Specifications for Construction 5750-0420 Plumbing:

Interior Walls. Brick walls with a plaster of paris finish over a cement plaster.

Interior Walls. Brick walls finished with cement plaster and plaster of paris. FLOORING: Vitrified tiles in bedrooms and living room areas. Wooden Finishing flooring in the Master Bedroom.

Examples of Interior Walls in a sentence

• FINISHES Interior Walls and Finishes As required for main electrical room, elevator hoistways, elevator machine room, and stairwell shafts.

• Non-Load Bearing Non-Rated Non-Rated walls, ceilings and other enclosures shall be constructed of 5/8” thick gypsum drywall over 20 gauge by 3-5/8” minimum width metal studs Interior Walls Supporting Casework or Fixtures All interior walls that will be used to mount casework, appliances, or fixtures will have backing installed within the wall appropriate to support this item’s weight and forces acting applied to it.

• Interior Walls/ - Interior concrete walls, office and cell Pipe Columns/ walls exposed to warehouse to be painted Guard Rails with two colors.

• Interior Walls Gypsum board, taped, textured and painted or textured wallpaper over metal studs.

• Roof (L), Exterior Wall (L), Interior Walls (T), Structural Repair (L), Interior Decorating (T), Yard Surfacing (L), Plumbing Equipment (T), Heating and Air Conditioning Equipment (T), Light Bulbs, Tubes and Ballasts (T), Electrical Equipment (T), Glass Breakage (T), Snow Removal (L)< Janitor (T), Trash Removal (T), Passage and Overhead Doors (T).

More Definitions of Interior Walls

Interior Walls. The main office interior partitions shall be framed from 2x4 wood studs and covered with 1/2 inch Sheetrock, taped and finished to 9 foot ceiling height. Office, hall, lunch room, foyer and rest room walls shall be primed with oil based paint and covered with a fabric backed vinyl wall covering in a pattern to be selected by the owner. Equipment rooms shall be painted with two coats of satin finish latex wall paint. The warehouse side of the main office wall and the office and rest rooms in the warehouse shall be covered with white 26 gauge steel panels.

Interior Walls. New partition walls shall be framed from 2x4 studs on 16" centers and covered on both sides with 1/2 inch drywall, taped and finished to the ceiling height shown on the plans. Drywall shall receive two coats of satin finish latex wall paint.

Interior Walls. 2"x4" wood frame partitions, 16" or 24" on center with textured and painted 5/8" GWB (one hour rating); sound attenuating insulation with R-11 xxxxx.

Interior Walls. Recommend interiors walls that separate conditioned space from unconditioned space, such as between an apartment and an unconditioned hallway, get insulated with densepack cellulose using the interior drill and blow method. Overhangs: Recommend any overhangs that are not insulated or are insufficiently insulated be densepacked with cellulose either from the outside, if possible, or through the floor of the living space above.

Interior Walls. Interior warehouse/office and demising walls will be constructed with concrete masonry unit (12" x 8" x 16"). Control joints will be filled with one layer 5/8" thick asphalt impregnated felt. STRUCTURAL SYSTEM/METALS

Interior Walls. Existing interior walls are constructed of metal studs, with 1/2” gypsum board taped, spackled, and sanded. Landlord will paint the walls, color to be chosen by Tenant from The Buncher Company’s standard selections.

Interior Walls gypsum board on each side of 3-5/8" metal studs, 20-gauge, at 24" on center, taped and sanded, ready for paint. Wall Height All demising walls shall go from the concrete slab to the underside of the roof deck. All interior walls at offices shall go from the slab to the underside of the dropped ceiling grid, unless otherwise indicated on the final plans.