General specifications. 6.1.1. A vehicle and its electrical/electronic system(s) or ESA(s) shall be so designed, constructed and fitted as to enable the vehicle, in normal conditions of use, to comply with the requirements of this Regulation.
General specifications. For the purpose of this Regulation, the vehicle shall fulfil the following requirements:
General specifications. 3.2.1. Each sample submitted shall conform to the relevant specifications of this Regulation.
General specifications. 6.1.1. The vehicle, its engine and its sound reduction system shall be so designed, constructed and assembled as to enable the vehicle, in normal use, despite the vibration to which it may be subjected, to comply with the provisions of this Regulation.
General specifications. 6.1.1. Each sample submitted in conformity with paragraphs 3.2.2.2., 3.2.2.3. and 3.2.2.4. above shall meet the specifications set forth in paragraph 6. of this Regulation.
General specifications. 1.1.1. The hose shall be so designed as to withstand a maximum operating pressure of 3,000 kPa.
General specifications. 5.1. The lighting and light-signalling devices shall be so fitted that under normal conditions of use as defined in paragraphs 2.24., 2.24.1. and 2.24.2. and notwithstanding any vibrations to which they may be subjected, they retain the characteristics prescribed by this Regulation and enable the vehicle to comply with the requirements of this Regulation. In particular, it shall not be possible for the lamps to be inadvertently maladjusted.
General specifications. 5.1.1. The "
General specifications. 6.1.1.1. All mirrors shall be adjustable.
General specifications. 3.1.1. The purpose of this chapter is to determine the provisions regarding the approval of synthetic flexible hoses for use with LPG, having an inside diameter up to 10 mm.
