Equipment Calibration. Bachem shall be responsible for ensuring that manufacturing is carried out according to Competent Authorities requirements and ICH Q7 rules using calibrated equipment Bachem shall be solely responsible for the equipment calibration and equipment maintenance program including record retention, recall bra lion, and preventive maintenance
Equipment Calibration. Certain information on this page has been omitted and filed separately with the Commission. Confidential treatment has been requested with respect to the omitted portions.
Equipment Calibration. Institution shall be responsible for ensuring Institution-owned equipment utilized by Institution in accordance with this Agreement, is serviced and/or calibrated as per manufacturer’s recommendation or more frequently as required by Janssen. Records verifying the equipment calibration and maintenance shall be provided to Janssen upon request. For calibrations that are performed solely at the request of Janssen, and that are not part of the recommended scheduled maintenance suggested by manufacturer, Janssen will reimburse Institution for the actual cost without mark-up for each calibration. Processing of payment will begin upon receipt of invoice and supporting documentation in accordance with paragraph (f) below. c)
Equipment Calibration. All manufacturing equipment will be supplied by Vericel. Supplier's calibration group will calibrate all applicable equipment within its capabilities. Calibration requirements for each piece of equipment will be agreed upon individually and provided in writing to Supplier by Vericel. For all special equipment or processes requiring calibration, Supplier will consult with Vericel on requirements prior to taking action towards setup and routine calibration. Additional expenses required for special calibration requirements will be agreed upon in advance and submitted to Vericel for payment.
Equipment Calibration. Unless otherwise provided by Control4, Supplier is required to ensure all test equipment(s) are properly calibrated to industry standard specifications at all times while in production use.
Equipment Calibration. All manufacturing equipment will be supplied by Aastrom. Supplier’s calibration group will calibrate all applicable equipment within its capabilities. Calibration requirements for each piece of equipment will be agreed upon individually and provided in writing to Supplier by Aastrom. For all special equipment or processes requiring calibration, Supplier will consult with Aastrom on requirements prior to taking action towards setup and routine calibration. Additional expenses required for special calibration requirements will be agreed upon in advance and submitted to Aastrom for payment.
Equipment Calibration. Institution shall be responsible for ensuring Institution- owned equipment utilized by Institution in accordance with this Agreement, is serviced and/or calibrated as per manufacturer’s recommendation or more frequently as required by Sponsor. Records verifying the equipment calibration and maintenance shall d) Kalibrácia vybavenia: Zdravotnícke zariadenie zodpovedá za to, aby vybavenie vo vlastníctve zdravotníckeho zariadenia, ktoré zdravotnícke zariadenie využíva podľa tejto zmluvy, malo zabezpečený servis a bolo kalibrované podľa odporúčaní výrobcu alebo častejšie, ak to požaduje zadávateľ. Záznamy dokladajúce kalibráciu a údržbu vybavenia sa be provided to Sponsor upon request. For calibrations that are performed solely at the request of Sponsor, and that are not part of the recommended scheduled maintenance suggested by manufacturer, Sponsor will reimburse Institution for the actual cost without mark-up for each calibration. Processing of payment will begin upon receipt of invoice and supporting documentation in accordance with paragraph (Erroir! Reference source not found. below. majú na požiadanie poskytnúť zadávateľovi. Za kalibrácie, ktoré sa vykonajú výhradne na požiadanie zadávateľa a ktoré nie sú súčasťou odporúčaného plánu údržby navrhovaného výrobcom, uhradí zadávateľ zdravotníckemu zariadeniu skutočné náklady bez navýšenia za každú kalibráciu. Spracovanie platby sa začne po prevzatí faktúry a sprievodnej dokumentácie v súlade s nižšie uvedeným odsekom (Erroir! Reference source not found.).
Equipment Calibration. Institution shall be responsible for ensuring Institution-owned equipment utilized by Institution in accordance with this Agreement, is serviced and/or calibrated as per manufacturer’s recommendation or more frequently as required by Sponsor. Records verifying the equipment calibration and maintenance shall be provided to Sponsor upon request. For calibrations that are performed solely at the request of Sponsor, and that are not part of the recommended scheduled maintenance suggested by manufacturer, Sponsor will reimburse Institution for the actual cost without mark-up for each calibration. Processing of payment will begin upon receipt of invoice and supporting documentation in accordance with paragraph f) below. d) Kalibrácia vybavenia: Inštitúcia zodpovedá za to, aby vybavenie vo vlastníctve inštitúcie, ktoré inštitúcia využíva podľa tejto zmluvy, malo zabezpečený servis a bolo kalibrované podľa odporúčaní výrobcu alebo častejšie, ak to požaduje zadávateľ. Záznamy dokladajúce kalibráciu a údržbu vybavenia sa na požiadanie poskytnú zadávateľovi. Za kalibrácie, ktoré sa vykonajú výhradne na požiadanie zadávateľa a ktoré nie sú súčasťou odporúčaného plánu údržby navrhovaného výrobcom, uhradí zadávateľ inštitúcii skutočné náklady bez navýšenia za každú kalibráciu. Spracovanie platby sa začne po prevzatí faktúry a sprievodnej dokumentácie v súlade s nižšie uvedeným odsekom f).
Equipment Calibration. Contractor shall identify all equipment requiring calibration by placing inspection stickers on the equipment, showing the date of calibration and/or date of service, and signature of service technician servicing the equipment. Contractor shall ensure all instruments used to calibrate the equipment shall be certified and traceable to the National Institute of Standards Technology (NIST). Conductivity tests will be performed in accordance with applicable rules and regulations. Contractor shall maintain an instrument log book and provide a calibration certificate signifying that a continuing quality control program is in existence. Contractor shall provide unlimited visits for all repair services requested or necessary to keep the equipment fully operational. Contractor shall invoice repair services provided outside regular scheduled maintenance visits, or services not covered by the Guarantee, Section 14 of the Scope of Work, at the Repair Hourly Rate, Section C, as specified herein. All parts requiring replacement will be replaced in accordance with the Parts Replacement, Section 9 of the Scope of Work. Repair services will be provided upon telephone request from the Institution Contract Liaison or designee. Contractor shall respond to requests and be on-site for repair service within twenty-four (24) hours. Every effort shall be made to perform services during normal business hours of 8:00 a.m. to 3:30 p.m., Monday through Friday, State holidays excluded. Contractor shall provide the requested services on the dates specified by the State or within five (5) working days. The State may, at its discretion, allow access to the equipment during nonbusiness hours when necessary. Non-emergency repair services performed outside of normal business hours as specified herein must be approved in advance in writing by the Institution Contract Liaison. Contractor shall make every attempt to complete repairs the same working day. Unless the repair requires parts that must be ordered, no repair may take longer than five (5) working days to complete. When a delay in repair will occur due to parts that must be ordered, written notification must be presented to the Institution Contract Liaison or designee immediately. All repair work shall be performed by an individual or firm possessing the appropriate California Contractors State License Board license.
Equipment Calibration. Institution shall be responsible for ensuring Institution- owned equipment utilized by Institution in accordance with this Agreement, is serviced and/or calibrated as per manufacturer’s recommendation or more frequently as required by Sponsor. Records verifying the equipment calibration and maintenance shall be provided to Sponsor upon request. For calibrations that are performed solely at the request of Sponsor, and that are not part of the recommended scheduled maintenance suggested by manufacturer, Sponsor will reimburse Institution for the actual cost without mark-up for each calibration. Processing of payment will begin upon receipt of invoice and supporting documentation in accordance with paragraph (f) below. d) Kalibrace zařízení: Zdravotnické zařízení nese odpovědnost za zajištění servisu a/nebo kalibrace zařízení ve vlastnictví Zdravotnického zařízení, které toto využívá, v souladu s touto Smlouvou, podle doporučení výrobce nebo častěji, jak to vyžaduje Zadavatel. Záznamy dokládající kalibraci a údržbu zařízení musí být na vyžádání předloženy Zadavateli. U kalibrací, které se provádějí výhradně na žádost Zadavatele a které nejsou součástí doporučené plánované údržby doporučené výrobcem, hradí Zadavatel Zdravotnickému zařízení skutečné náklady bez přirážky za každou kalibraci. Zpracování platby začne po obdržení faktury a podkladů v souladu s článkem (f) níže. e) Investigator Meetings: Sponsor may recommend or require the Principal Investigator, or a Sponsor-approved Sub- Investigator designee, and a Study nurse/coordinator to attend meetings, including but not limited to an Investigator’s Meeting. Sponsor shall provide and pay all reasonable and appropriate travel expenses in accordance with Sponsor’s travel policy, including modest lodging and meals associated with such e) Schůzky se Zkoušejícím: Zadavatel může doporučit nebo požadovat, aby se schůzek, zejména schůzky se Zkoušejícím, zúčastnil Hlavní zkoušející, případně Zadavatelem schválený zmocněnec Člena týmu zkoušejícího, a dále sestra/koordinátorka Klinického hodnocení. Zadavatel poskytne a uhradí veškeré přiměřené a řádné cestovní výdaje v souladu s interní směrnicí Zadavatele o náhradě cestovních nákladů, včetně skromného ubytování a stravování spojených s těmito meetings. The parties agree that attending such meetings is reasonable and necessary to ensure all parties engaged in the Study have a clear understanding of the Protocol and its requirements. Processing of payment will begin up...
