Environmental Control. The Consortium Members shall have a safety and environment management system that complies with the Best Practices of the Oil Industry and the Applicable Laws and Regulations. The Consortium Members shall, among other obligations: ensure preservation of an ecologically balanced environment; mitigate the occurrence of impacts and/or damages to the environment; ensure safety of the Operations for purposes of protecting human life, the environment, and the Contracting Party’s properties; ensure protection of the Brazilian historical and cultural heritage; recover degraded areas; meet the operational safety and environmental preservation recommendations issued by ANP, pursuant to the Applicable Laws and Regulations. In case of an environmental permitting process in which the applicable authority deems that a public hearing is required, the Consortium Members shall submit to ANP a copy of the studies prepared aiming at obtaining the permits at least thirty (30) business days before the hearing. The Consortium Members shall submit to ANP a copy of the environmental permits and their relevant renewals, in compliance with the deadlines defined in the specific regulations issued by ANP or, in a shorter period, whenever necessary to support an authorization procedure that requires such documents. During effectiveness of this Agreement, the Consortium Members shall submit to ANP the inventory of greenhouse gas emissions by May 31st of each year. The inventory shall detail the gases by typology of emission source and include their disposal. The Consortium Members shall submit to ANP and to other competent authorities the contingency plan regarding accidents due to spill of Oil, Gas, and its by-products. The Consortium Members shall immediately inform ANP and the competent authorities of any occurrence arising from an intentional or accidental fact or act involving risk or damage to the environment or to human health, property damages to their own or third-party assets and properties, fatalities or severe injuries to the personnel or to third parties, or unscheduled interruptions of the Operations, pursuant to the Applicable Laws and Regulations and the instructions provided for in manuals issued by ANP, when applicable. The Consortium Members shall immediately inform the competent authorities about the occurrence of any spill or loss of Oil and Gas and other incidents, as well as the measures taken to solve the problem.
Environmental Control. The Concessionaire shall have a safety and environment management system that complies with the Best Practices of the Oil Industry and the Applicable Laws and Regulations. Among other obligations, the Concessionaire shall: ensure preservation of an ecologically balanced environment; mitigate the occurrence of impacts and/or damages to the environment; ensure safety of the Operations for purposes of protecting human life, the environment, and the Federal Government’s heritage; ensure protection of the Brazilian historical and cultural heritage; restore degraded areas in compliance with the Applicable Laws and Regulations and the Best Practices of the Oil Industry; meet the Safety Recommendations issued by ANP pursuant to the Applicable Laws and Regulations. ANP may, at any time, request a copy of the studies submitted for approval of the applicable environmental authority if awareness of its content becomes required for the instruction/management of the Agreement entered into herein. In case of an environmental permitting process in which the applicable authority deems that a Public Hearing is required, the Concessionaire shall submit to ANP a copy of the studies prepared aiming at obtaining the permits at least thirty (30) business days before the Hearing. The Concessionaire shall submit to ANP a copy of the environmental permits and their relevant renewals, pursuant to the deadlines defined in the specific regulations issued by ANP or, before that, if awareness of the content becomes necessary for the instruction or management of the Agreement entered into herein. The Concessionaire shall immediately inform ANP and the competent authorities of any occurrence arising from an intentional or accidental fact or act involving risk or damage to the environment or to human health, property damages to its own or third-party assets and properties, fatalities or severe injuries to the personnel or to third parties, or unscheduled interruptions of the Operations, pursuant to the Applicable Laws and Regulations and the instructions provided for in manuals issued by ANP, when applicable.
Environmental Control. Where envi- ronmental conditions could reasonably be expected to have an adverse effect on product quality, the manufacturer shall establish and maintain proce- dures to adequately control these envi- ronmental conditions. Environmental control system(s) shall be periodically inspected to verify that the system, in- cluding necessary equipment, is xxx- xxxxx and functioning properly. These activities shall be documented and re- viewed.
Environmental Control. Facilities, including data and processing centers, must maintain appropriate environmental controls, including fire detection and suppression, climate control and monitoring, power and back-up power solutions, and water damage detection. Environmental control components must be monitored and periodically tested.
Environmental Control. Environmental Control requirements shall be governed as per the QC General Requirements — Environmental Control Standards document included in the Quality and Test Procedures.
Environmental Control. Sr. Analyst - Environment Sr. Analyst - Occupational Health Intermediate Analyst - Environment Intermediate Analyst - Occupational Health J J H H Analyst - Environment Analyst – Occupational Health G G Technologist Design Ladder Sr. Designer J Designer I Sr. Draftsperson H Draftsperson F Technologist Project Control Sr. Project Controls Coordinator X Project Controls Coordinator J Technical Specialist Specialist I Specialist Assistant G Technologist Systems Development Systems Analyst J Programmer Analyst I Programmer II G Programmer I * Mines Technical Services Sr. Mines Technologist J Mines Technologist I Assistant Mines Technologist G Technologist Exploration (Technological) Sr. Geological Technologist I Geological Technologist G Technologist Exploration (University) Sr. Geologist X Geologist I University Graduate Analytical Sr. Chemist Sr. Process Analyst X X Chemist I Process Analyst I Sr. Analyst G Analyst F Technologist Technical Sr. Metallurgical Technologist J Metallurgical Technologist I Sr. Process Assistant G Process Assistant F Technologist/Technician Plant Maintenance Sr. Maintenance Assistant X Maintenance Assistant G Technologist Water Treatment Sr. Water Treatment Plant Operator H Water Treatment Plant Operator G Procurement Procurement Analyst II (Buyer/Contract Administrator) I Procurement Analyst I (Buyer/Contract Administrator) H SCHEDULE ‘E’ REGULAR MONTHLY SALARIES EFFECTIVE JANUARY 1, 2013 Grade Entry Dev Accept Full Perf C 3330 3580 3825 4160 D 3625 3895 4170 4530 E 0000 0000 0000 4955 F 4280 4600 4920 5350 G 4590 4930 5275 5735 H 0000 0000 0000 6280 I 5370 5770 6175 6710 J 5675 0000 0000 0000 K 0000 0000 0000 7530 Effective January 1, 2014, the regular salaries in effect on December 31, 2013 will be increased by one percent (1%). Effective January 1, 2015, the regular salaries in effect on December 31, 2014 will be increased by two percent (2%). Effective January 1, 2016, the regular salaries in effect on December 31, 2015 will be increased by two percent (2%). Effective January 1, 2017, the regular salaries in effect on December 31, 2016 will be increased by two and one half percent (2.5%) SCHEDULE ‘F’ SEASONAL EMPLOYEES EFFECTIVE JANUARY 1, 2013 Current Classification Regular Monthly Salary Leader $4115 Park Person $3190 Effective January 1, 2014, the regular salaries in effect on December 31, 2013 will be increased by one percent (1%). Effective January 1, 2015, the regular salaries in effect on Dece...
Environmental Control. 21.1. The Concessionaire shall have a safety and environment management system that complies with the Best Practices of the Oil Industry and the Applicable Laws and Regulations.
Environmental Control. Tenant shall, upon demand, reimburse Landlord the cost of any fine or penalty, and any reasonable attorney fees, paid or incurred by Landlord as a result of, or evolving out of, an Environmental Citation or a decision of the Baltimore City Environmental Control Board, a panel of the Board, or one of its hearing officers, when the violation is a result of any act or omission of the Tenant or the Tenant’s family, agents, employees, guests or invitees, or where the building in which the Premises is located is a single family dwelling and the act or omission which resulted in the issuance of the Environmental Citation was not the Landlord’s responsibility under this Lease and was not committed by the Landlord.
Environmental Control. In performing the Work, the Contractor shall become thoroughly familiar with all Federal, State, and local statutes, ordinances, and directives with respect to the elimination of excessive noise and pollution of air, water, and soil due to construction and other operations. Attention shall be given to reduce the noise of heavy construction equipment and to the control of dust, smoke, and fumes from construction equipment and other operations on the Work site, and the dirt and noise created by heavy truck operations over City streets in accordance with ordinances of the City of Chicago and orders of the SCC. The discharge of Hazardous Materials into waterways and City sewers will not be permitted.
Environmental Control. Opus shall use commercially reasonable efforts to maintain cold aisle conditions in the Premises, as measured at two (2) to five (5) feet above the floor level, in accordance with the “Recommended Level” set forth in the then-current ASHRAE TC 9.9 (American Society of Heating, Refrigeration and Air-Conditioning Engineers, Technical Committee 9.9) Design Considerations for Datacom Equipment Centers, for Class 1 buildings (the “ASHRAE Standards”), the current version of which is set forth in Table 2.2 below. Table 2.2 2008 ASHRAE Environmental Guidelines for Datacom Equipment Condition Allowable Level Recommended Level Temperature Control Range 59° F - 90° F 64.4° F - 80.6°F Maximum temperature rate of change 9° F per hour Relative humidity control range 20%-80% 63° Xxx Xxx point 25%-60% ASHRAE TC 9.9 Class 1: Typically a Datacom facility with tightly controlled environmental parameters (dew point, temperature, and relative humidity) and mission critical operations; types of products typically designed for this environment are enterprise servers and storage products. In the event that:
