Control Measures. The following control measures shall be employed on site to prevent the effects of Heat Stress: • Workers shall have easy access to cool, clean drinking water; • Caffeinated drinks should be avoided as they promote dehydration; • Mist busters will be deployed for dust suppression and aid in worker comfort in earthworks zones; • Physical activity/tasks reduced where possible; • Rotation of workers; • Work in cooler parts of the day; • Utilise Shaded areas; • Reduction of PPE, where permissible; • Wear light clothing under coveralls; • Individuals should seek medical advice on the effect of medication being taken and communicate with the Company and/or the HSR if they believe necessary; • In addition, rest breaks as needed by an individual. Individuals should not be discouraged from taking needed rest breaks; • It is expected mandated breaks of "smoko" and lunch be adhered to; and Training.
Control Measures. 1. Each member exporting cocoa shall require the presentation of an authorized Council control document and, if applicable, a valid certificate of levy payment, before permitting the shipment of cocoa from its customs territory. Each member importing cocoa shall require the presentation of an authorized Council control document and, if applicable, a valid certificate of levy payment, before permitting the import of any cocoa into its customs territory whether from a member or a non- member.
Control Measures. The need for, the type and the introduction of internal control measures shall be discussed at the enterprise. In other respects reference is made to the Act and regulations relating to personal data and Supplementary Agreement V in Part C. The control measures effected should be re-assessed by the parties at regular intervals.
Control Measures. Each party shall implement adequate control measures to protect Licensor's Intellectual Property Rights and to cooperate in the other party's efforts to protect such Intellectual Property Rights. Neither party shall commit any act or omit to take any act or permit any act to be taken or not to be taken that would cause any of the Licensor Properties to vest in the public domain anywhere in the United States and Canada.
Control Measures. 9.1. Representatives of RWI, Sida and the Swedish National Audit Office may at all times carry out audits, inspections, investigations, site visits or other control measures related to the Project. The objective of such control measures may inter alia be to verify that the funding contribution from RWI has been used in accordance with the Agreement. The costs of inspection shall be borne by RWI or Sida in such case.
Control Measures. Where, under foreseeable conditions, the allowable limits could be exceeded, the installation must be fitted with, or provision made for the fitting of, suitable protective devices. The capacity of the protection system shall be established considering all of the probable conditions contributing towards internal excess pressure. The safety system shall follow the rules according to EN ISO 4126. The pressure relief devices shall be: installed, commissioned, and periodically tested according to General Safety Instruction on standard pressure equipment (GSI-M2) ; CE marked category IV and compliant with the harmonized standard ISO 4126 on safety devices for protection against excessive pressure. A guideline document (EDMS 1209900) provides additional information for the purchase of pressure relief devices. The initial inspection of the pressure relief devices shall be carried out by the HSE Unit inspection services). The proof test shall take the form of a hydrostatic pressure test. Where a hydrostatic pressure test is harmful or impractical other tests, with appropriate safety compensatory measures, may be carried out. Other tests of a recognized value or method may be carried out subject to the prior approval of the HSE Unit The proof test shall be carried out under the supervision and validation of the HSE Unit inspection service.
Control Measures. According to the General Safety Instruction on standard lifting equipment (GSI-M1), the lifting equipment shall be subject to an initial load test and examination test. The load test shall be carried out under the supervision of the HSE Unit inspections service. The load test consists of: a static load test in which a load of 1.5 times the load capacity of the lifting accessory (CMU) is applied for 15 minutes, a dynamic load test in which a load 1.1 times the load capacity of the lifting accessory is applied and the accessory is handled as for its conditions of use. After successful testing, the HSE Unit inspection service authorizes the use of the lifting accessories at CERN.
Control Measures. CERN activities discharging pollutants into the air shall be controlled by implementing as a general rule, and in order of priority, the following measures: To reduce at the minimum the discharge of pollutants in the air; To collect the air at the source; To release air above roof level; To ensure that the emission of air effluents comply with emission limit values set by the Host State regulations: Articles 26, 27, 28, 29, 30 of the Arrêté du 02/02/98 relatif aux prélèvements et à la consommation d'eau ainsi qu'aux émissions de toute nature des installations classées pour la protection de l'environnement soumises à autorisation (France) ;
Control Measures. The storage of chemicals shall be made according to the following regulations: Stockage et transfert des produits chimiques dangereux, INRS 2009 (France) ; Guide Pratique: Entreposage des matières dangereuses, Xxxxxxxx xx xxxxxxxx 0000 (Xxxxxxxxxxx) ;
Control Measures. The HSE Unit performs environmental noise measurements in order to check the compliance of with the applicable regulations.
