Phytosanitary inspection definition

Phytosanitary inspection means the inspection intended to prevent the spread and the introduction across national boundaries of pests of plants and plant products;
Phytosanitary inspection means an inspection of documents, identity and health check of plants, plant products or other regulated articles to determine if harmful organisms are present.
Phytosanitary inspection means official inspection of:

Examples of Phytosanitary inspection in a sentence

  • Process of Phytosanitary inspection and release of the consignments on receipt of application for quarantine inspection and clearance of food item from importer or his clearing agent, the application is registered.

  • Phytosanitary inspection of woody plants for planting at European Union entry points: a practical enquiry.

  • The Ministry, the Phytosanitary inspection, the Public officers charged in plant protection and the producers in agriculture shall perform and cooperate permanently in following up the health of plants, plant products and other objects, in order to identify and report on the introduction and spread of harmful organisms and to eradicate or control them.

  • These safeguards must remain intact until arrival in the continental United States or the consignment will be denied entry.(4) During the time the packinghouseis in use for exporting pitahaya fruit to the continental United States, the packinghouse may only accept pitahaya fruit from registered production sites.(e) Phytosanitary inspection.

  • No Federal Phytosanitary inspection is required, but fruit that does not meet the requirements for a Federal Certificate or a Limited Permit (that allows distribution in parts of the US) must travel under APHIS seal and be accompanied by a Limited Permit for Export.

  • Inspection to be carried out by a dedicated team of officials who have undergone in-house hands-on training on Phytosanitary inspection and certification.

  • Has undergone special in-house hands-on training on Phytosanitary inspection and certification.

  • Process of Phytosanitary inspection and release of the consignments On receipt of application for quarantine inspection and clearance of food item from importer or his clearing agent, the application is registered.

  • Phytosanitary inspection of the treated fruit must be conducted by Plant Quarantine Authority of exporting country and the details of the treatment included on the Phytosanitary Certificate.

  • Phytosanitary inspection can be delegated to the Customs, particularly at BCPs which do not require a full time phytosanitary inspector.

Related to Phytosanitary inspection

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Structural Engineer means the Engineer appointed or to be appointed from time to time by Promoter for the preparation of the structural design and drawings of the buildings .

  • The Site, where applicable, means the designated project place(s) named in the bidding document.

  • The Works/Project means the works to be executed or done under this contract.

  • Sanitary with respect to a building, means it is free from danger or hazard to the health of persons occupying or frequenting it or to that of the public, if such danger arises from the method or materials of its construction or from any equipment installed therein, for the purpose of lighting, heating, ventilating, or plumbing.

  • Sanitary Sewer System means all facilities, includ- ing approved LOSS, used in the collection, transmission, storage, treatment, or discharge of any waterborne waste, whether domestic in origin or a combination of domestic, commercial, or industrial wastewater. LOSS are only consid- ered sanitary sewer systems if they are designed to serve urban densities. Sanitary sewer system is also commonly known as public sewer system.

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • Sanitary Sewage means wastewaters from residential, commercial and industrial sources introduced by direct connection to the sewerage collection system tributary to the treatment works including non-excessive inflow/infiltration sources.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Sanitary sewerage means a system of public sewers for carrying off waste water and refuse, but excluding sewage treatment facilities, septic tanks, and leach fields owned or operated by the licensee or registrant.

  • Onsite means within the Prescribed Premises boundary.

  • Sanitary survey means an onsite review of the water source, facilities, equipment, operation and maintenance of a public water system for the purposes of evaluating the adequacy of such source, facilities, equipment, operation and maintenance for producing and distributing safe drinking water.

  • Sanitary Waste means wastes comprising of used diapers, sanitary towels or napkins, tampons, condoms, incontinence sheets and any other similar waste ;

  • Laboratory or “LANL” means the geographical location of Los Alamos National Laboratory, a federally funded research and development center owned by the DOE / NNSA.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • The Project Site, where applicable, means the place or places named in the SCC.

  • Certificate of inspection means an unsworn statement,

  • Study Site means the location(s) under the control of the Institution where the Study is actually conducted as set out in Schedule 1.

  • Sanitary Sewer Overflow or “SSO” means any overflow, spill, release, discharge or diversion of untreated or partially treated wastewater from the sanitary sewer system. SSOs include:

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Plant Site (Works, Factory) means the local integration of one or more plants, with any intermediate administrative levels, which are under one operational control, and includes common infrastructure, such as:

  • Decontamination means a process that attempts to remove or reduce to an acceptable level a contaminant exceeding an allowable threshold set forth in these Rules in a harvest batch or production batch.

  • Cultivation site means a location where cannabis is planted, grown, harvested, dried, cured, graded, or trimmed, or a location where any combination of those activities occurs.

  • Sanitary Sewer means a sewer which carries sewage and to which storm, surface, and ground waters are not intentionally admitted.

  • Project site, where applicable, means the place indicated in bidding documents.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.