Calibration definition

Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

Calibration means the process of setting a measurement system's response so that its output agrees with a range of reference signals.

Calibration means the determination of:

Examples of Calibration in a sentence

• Special Requirements: None EXHIBITB PRICING Paid by Purchaser to Vendor for Each Offender Monthly IID Service and Calibration Fee $59.99 Monthly HMU Service and Calibration Fee $59.99 Removal Fee $0.00 Installation Fee $0.00 Reset Fee (Lock Out Fee) Per Occurrence $75.00 Monthly LPP Fee $9.99 *Prices do not include taxes lntoxal ;,,,, - r.

• Calibration of underwater noise recorders in a pressure chamber Figure 10 shows the NPL pressure chamber configured with SM4M underwater noise recorder which was used in round xxxxx tests between NPL, TÜBİTAK, FOI, CNR and ISPRA.

• Calibration of reference hydrophone was done by TÜBİTAK using the pressure calibration method developed in objective 1.

• In the Standards and Calibration sub-committee the prestigious International Quiet Oceans Experiment (IQOE), partners have contributed to technical discussions.

• Calibration and Maintenance prior to connection Before connecting, Consumer shall complete all inspections and tests finalized in consultation with the (Name of the Distribution license) and if required Gujarat Energy Transmission Corporation Limited (GETCO) to which his equipment is connected.

More Definitions of Calibration

Calibration means the set of operations, which establishes, under specified conditions, the relations between values indicated by a measuring instrument or measuring system, or values represented by a material measure or a reference material and the corresponding values of a quantity realised by a reference standard;

Calibration means the process of setting a measurement system's response so that its output agrees with a range of reference signals. Contrast with "verification";

Calibration means a set of operations, performed in accordance with a definite documented procedure, that compares the measurement performed by a measurement device or working standard for the purpose of detecting and reporting or eliminating by adjustment errors in the measurement device, working standard, or aeronautical product tested;

Calibration means determining either of the following:

Calibration means the set of operations that establish, under specified conditions, the relationship between values of quantities indicated by a measuring instrument or measuring system, or values represented by a material measure or a reference material and the corresponding values realised by standards;

Calibration means establishing or verifying the response curve of a measurement device using several different measurements having precisely known quantities.

Calibration means, in the case of the Georgia Analyzer System (GAS), the process of establishing or verifying that the response curve of the GAS bench using the applicable calibration gases. In the case of a dynamometer, “calibration” means the process of verifying that the horsepower absorbed are within tolerances using a coast down procedure. In the case of a fuel cap tester, “calibration” means the process of verifying that the measured pressure drop over time is between the upper and lower control limits.