harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;
Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.
Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.
safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;
Renewable Energy Standard means the minimum renewable energy capacity portfolio, if applicable, and the renewable energy credit portfolio required to be achieved under section 28 or former section 27.
Energy efficiency portfolio standard means a requirement to
Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;
Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.
Renewable Portfolio Standard or “RPS” means a state or federal law, rule or regulation that requires a stated amount or minimum proportion or quantity of electricity that is sold or used by specified persons to be generated from Renewable Energy Sources.
Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.
Design Standards means the standards developed as a requirement of the Programmatic Agreement
California Renewables Portfolio Standard means the renewable energy program and policies established by California State Senate Bills 1038 and 1078 as amended by Senate Bill SB1X, and codified in California Public Utilities Code Sections 399.11 through 399.31 and California Public Resources Code Sections 25740 through 25751, as such provisions are amended or supplemented from time to time.
Contract Standard means such standard as complies in each and every respect with all relevant provisions of the Contract;
Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.
Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.
Community-Wide Standard means the standard of conduct, maintenance or other activity generally prevailing in the Community. Such standard may be more specifically determined by the Board of Directors of the Association. Such determination, however, must be consistent with the Community-Wide Standard originally established by the Declarant.
Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.
Regulatory Requirement means any law, regulation or court order, or any rule, direction, guideline, code, notice or restriction (whether or not having the force of law) issued by any regulatory authority, governmental agency (including tax authority), clearing or settlement bank or exchange, or industry or self-regulatory body, whether in or outside Hong Kong, to which HKICL, we or any other Participant or the respective affiliates or group companies, or you are subject or are expected to comply with from time to time.
Industry Standards means security measures that are commercially reasonable in the information technology industry and that are designed to ensure the security, integrity, and confidentiality of Accenture Data, and to protect against Security Incidents.
Airworthiness Directive or “AD” means any airworthiness directive issued by the Certificating Authority, in addition to any airworthiness directive issued by the Aeronautics Authority, each to the extent the same is applicable to the Aircraft and/or any Item of Equipment.
Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.
Reasonable and prudent parent standard means the
Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).
Xxxxxx Xxx Guides The Xxxxxx Xxx Xxxxxxx' Guide and the Xxxxxx Xxx Servicers' Guide and all amendments or additions thereto.
NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.