Forest practice means any activity conducted on or directly pertaining to forest land and relating to growing, harvesting, or processing timber, including but not limited to:
Best Practices means a term that is often used inter-changeably with “evidence- based practice” and is best defined as an “umbrella” term for three levels of practice, measured in relation to Recovery-consistent mental health practices where the Recovery process is supported with scientific intervention that best meets the needs of the Client at this time.
Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.
Best Practice means solutions, techniques, methods and approaches which are appropriate, cost-effective and state of the art (at Member State and sector level), and which are implemented at an operational scale and under conditions that allow the achievement of the impacts set out in the award criterion ’Impact’ first paragraph (see below).
Servicer Policies and Practices means, with respect to the Servicer’s duties under Exhibit A to the Servicing Agreement, the policies and practices of the Servicer applicable to such duties that the Servicer follows with respect to comparable assets that it services for itself and, if applicable, others.
Prudent Electrical Practices means those practices, methods, standards and equipment commonly used in prudent electrical engineering and operations to operate electrical equipment lawfully and with safety, dependability and efficiency and in accordance with the National Electrical Safety Code, the National Electrical Code and any other applicable federal, state and local codes provided, however, that in the event of a conflict, the applicable federal, state or local code shall govern.
Past Practices shall have the meaning set forth in Section 3.5.
Best Management Practices (BMPs means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the state. BMPs also include treatment requirements, operating procedures, and practices to control site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.
ISO-NE Practices means the ISO-NE practices and procedures for delivery and transmission of energy in effect from time to time and shall include, without limitation, applicable requirements of the NEPOOL Agreement, and any applicable successor practices and procedures.
PJM Regional Practices Document means the document of that title that compiles and describes the practices in the PJM Markets and that is made available in hard copy and on the Internet. PJM Region Installed Reserve Margin:
New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.
Good Utility Practices mean any of the practices, methods or acts engaged in or approved by a significant portion of the electric energy industry with respect to similar facilities during the relevant time period which in each case, in the exercise of reasonable judgment in light of the facts known or that should have been known at the time a decision was made, could have been expected to accomplish the desired result at reasonable cost consistent with good business practices, reliability, safety, law, regulation, environmental protection and expedition. Good Utility Practices are not intended to be limited to the optimum practices, methods or acts to the exclusion of all others, but rather to delineate the acceptable practices, methods or acts generally accepted in such industry.
Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.
Prudent Industry Practices means, at a particular time, any of the practices, methods and acts which, in the exercise of reasonable judgment, will result in the proper operation and maintenance of the assets owned by a Party or its Affiliates and shall include, without limitation, the practices, methods and acts engaged in or approved by a significant portion of the industry at such time with respect to the assets of the same or similar types as the assets owned by such Party or its Affiliates. Prudent Industry Practices are not intended to be limited to optimum practices, methods or acts, to the exclusion of all others, but rather represent a spectrum of possible practices, methods and acts which could have been expected to accomplish the desired result at a commercially reasonable cost in a reliable, safe and timely fashion, in compliance with the applicable limited partnership agreement and limited liability company agreement and in accordance with all applicable laws. Prudent Industry Practices are intended to entail the same standards as the Parties would, in the prudent management of their own properties, use from time to time.
standards of generally recognised accounting practice means an accounting practice complying with standards applicable to municipalities or municipal entities as determined by the Accounting Standards Board
Policies and Procedures means the written policies and procedures of the Client in any way related to the Services, including any such policies and procedures contained in the Organic Documents and the Offering Documents.
Best management practices (BMP) means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the United States. BMPs include treatment requirements, operation procedures, and practices to control plant site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.
Standards of Practice means the care, skill, and
Prudent Utility Practices means those practices, methods, techniques and standards, that are generally accepted for use in electric utility industries taking into account conditions in India, and commonly used in prudent electric utility engineering and operations to design, engineer, construct, test, operate and maintain equipment lawfully, safely, efficiently and economically as applicable to power stations of the size, service and type of the Project, and that generally conform to the manufacturers' operation and maintenance guidelines.
Emerging best practice or "promising practice" means a
Electronic Subcontracting Reporting System (eSRS) means the Governmentwide, electronic, web-based system for small business subcontracting program reporting. The eSRS is located at http://www.esrs.gov.
SDX System means the system used by NERC to exchange system data.
Group practice means a group of two or more health care providers legally organized as a partnership, professional corporation, or similar association:
International air transportation means transportation by air between a place in the United States and a place outside the United States or between two places both of which are outside the United States.
PV System means a residentially hosted roof-top solar electric generating system, including photovoltaic panels, racks, wiring and other electrical devices, conduits, weatherproof housings, hardware, one or more inverters, remote monitoring systems, connectors, meters, disconnects and over current devices.
Generally accepted standards of medical practice means standards that are based upon: credible scientific evidence published in peer-reviewed medical literature and generally recognized by the relevant medical community; physician and health care provider specialty society recommendations; the views of physicians and health care providers practicing in relevant clinical areas and any other relevant factor as determined by statute(s) and/or regulation(s).