Calibration curve definition

Calibration curve means the graphical relationship between the known values, such as concentrations, of a series of calibration standards and their instrument response.
Sample 1Sample 2Sample 3
Calibration curve means the functional relationship between in- strument response and target analyte concentration determined for a series of calibration standards. The calibration curve is obtained by plotting the instrument response versus concentration and performing a regression analysis of the data.
Sample 1Sample 2Sample 3
Calibration curve means the relationship between an analyzer’s response to the injec- tion of a series of calibration gases and the actual concentrations of those gases.
Sample 1Sample 2

Examples of Calibration curve in a sentence

  • If necessary, fol- low the manufacturer’s instructions for initial start-up and basic operating ad- justments.(2) Calibration curve.

  • When the concrete level had reached about 1.5 meters up on both sides, the flow was directed to the two upper valves by a third split valve.The formwork was filled up to the top from those valves.

  • Calibration curve range and each point used, at least 5 points should be used for the calibration curve.

  • Calibration Gases: gases of accurately known concentrations that are used as references for establishing or verifying the Calibration curve and Accuracy of an analyzer.

  • Calibration curve parameters, calculated concentrations for the standards, and calculated concentrations for the quality control samples were provided.

  • Any property with pooled oil accumulation, oil flowing onto public rights-of-way or adjacent property, or excessive accumulations of grease or oil on paved surfaces, buildings, walls, or fences.

  • Calibration curve was evaluated at the beginning of each validation day of five consecutive days (n = 5).

  • Calibration curve acceptance criteria are used to evaluate the suitability of a particular curve for estimating target DNA sequence concentrations in environmental water samples.

  • If necessary, follow the manufacturer’s instructions for initial start-up and basic operating adjustments.(b) Calibration curve.

  • Calibration curve range and each point used - at least 5 points should be used for the calibration curve.


More Definitions of Calibration curve

Calibration curve means a graphical display of the functional relationship between the instrument or analyti- cal device response and the analyte amount.
Sample 1
Calibration curve means the graphical relationship between the known values, such as
Sample 1

Related to Calibration curve

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Generation Interconnection Customer means an entity that submits an Interconnection Request to interconnect a new generation facility or to increase the capacity of an existing generation facility interconnected with the Transmission System in the PJM Region. Generation Interconnection Request:

  • Carbon dioxide or “CO2” means the most common of the six primary greenhouse gases, consisting on a molecular level of a single carbon atom and two oxygen atoms.

  • Meter means, unless otherwise qualified, a device that measures and registers the integral of an electrical quantity with respect to time.

  • Surplus Interconnection Customer means either an Interconnection Customer whose Generating Facility is already interconnected to the PJM Transmission System or one of its affiliates, or an unaffiliated entity that submits a Surplus Interconnection Request to utilize Surplus Interconnection Service within the Transmission System in the PJM Region. A Surplus Interconnection Customer is not a New Service Customer.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Interconnection Customer means a Generation Interconnection Customer and/or a Transmission Interconnection Customer.

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Outputs means the goods or services that are produced by an entity or other person;

  • Blend means seed consisting of more than one variety of a kind, each in excess of five percent by weight of the whole.

  • Bulk mixing plant means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work;

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.