Base load definition

Base load means the load level at which a gas turbine is normally operated.
Sample 1Sample 2Sample 3
Base load means: (i) as a mode of operation, operating for >4000hrs pa; and (ii) as a load, the maximum load under ISO conditions that can be sustained continuously, i.e. maximum continuous rating.
Sample 1Sample 2Sample 3
Base load means, when used in relation to a Unit, that the combustion turbine is operating on its base load temperature control curve with inlet cooling in service, as applicable to the ambient temperature conditions, and with zero power augmentation and zero duct firing.] [Applicable only to combined cycle facilities.]
Sample 1Sample 2Sample 3

Examples of Base load in a sentence

  • The Base Load Percentage shall equal 100% if the PLC Per Bid Block is less than or equal to the Base PLC Per Bid Block plus five (5) megawatts.

  • Buyer shall be responsible for procuring from the PJM spot market the full-requirements service for Residential and Type I SOS that is in excess of the Residential Monthly Settlement Base Load and the Type I Monthly Settlement Base Load, respectively.

  • The Residential Base Load Percentage and the Type I Base Load Percentage shall be determined as set forth below.

  • The Base Load Percentage shall equal the product of: (i) the quotient of the Base PLC Per Bid Block plus five (5) megawatts and the PLC Per Bid Block; and (ii) 100 if the PLC Per Bid Block is greater than the Base PLC Per Bid Block plus five (5) megawatts.

  • For Non-Residential Type II SOS, the Type II Base Load Percentage shall equal 100% for the entire term of this Agreement.


More Definitions of Base load

Base load means the load level at which a gas turbine is normally oper- ated.
Sample 1Sample 2Sample 3
Base load means the required quantum of power as specified by the Procurer at Sr. No. 4 of Clause 1.3.1 of this RFP;
Sample 1Sample 2
Base load means the average of monthly minimum system load in MW during the financial year of a distribution business/licensee in its area of supply, defined in terms of system demand in MW, or as decided by the Commission from time to time;
Sample 1Sample 2
Base load means the required quantum of power as specified by the Procurer(s) / Authorized Representative at Sl.No. 4 of Clause 4.1.1 of this RFP.
Sample 1
Base load means the minimum amount of electric power required over a given period of time;
Sample 1
Base load means the electricity generation normally dispatched by the Power Pool of Alberta on a continuous basis.
Sample 1
Base load is defined as operating on its base load temperature control curve. Seasonal testing under the Definitive Agreement will be done to establish the maximum Capacity of the Units for the periods (1) June 1 through September 30 ("Summer Months") based on test results adjusted to July Peak Conditions (as defined below) and (2) January 1 through May 31 and October 1 through December 31 ("Non- Summer Months") based on test results adjusted to standard "ISO Conditions" (59°F and 60% relative humidity). "Peak July Conditions" are the conditions (temperature and humidity for the site) based on the average of the monthly maximum daily peak temperatures of the preceding 10 years for the month of July as provided by the National Climatic Data Center ("NCDC") at xxxx://xxx.xxxx.xxxx.xxx/servlets/ULCD. Data from the NCDC should be for a geographically nearby weather station that approximates the conditions at the specific plant site. Buyer shall have the right to approve the weather station employed in the development of the Peak July Conditions.
Sample 1