PACKAGING AND MARKING. D.1. PACKAGING AND MARKING Packaging and marking of all deliverables must conform to normal commercial packing standards to assure safe delivery at destination. Clauses and other requirements regarding packaging and marking shall be designated by the OCO at the task order level. (END OF SECTION D)
PACKAGING AND MARKING. D.1.1 The packaging and marking requirements for this HCA shall be governed by Clause 2, Shipping Instructions-Consignment, of the Government of the District of Columbia’s Standard Contract Provisions for use with Supplies and Services Contracts, dated July 2010.
PACKAGING AND MARKING. D.1 The packaging and marking requirements for this contract shall be governed by clause number (2), Shipping Instructions-Consignment, of the Government of the District of Columbia's Standard Contract Provisions for use with Supplies and Services Contracts, dated July 2010. (Attachment J.1)
PACKAGING AND MARKING. Each packing unit must be marked for identification purposes with an item tag and a release note. Whenever possible, all individual items must be unambiguously marked in order to ensure traceability as far back as the raw material. The marking of the packing unit must contain at least the following information: - Article description - Customer article number - Quantity - Inspection status - Production batch - Date of manufacture and filling - Dispatcher In the case of auxiliary materials (lacquers, primers, adhesives, activators, etc.), a "best before date" and recommended storage temperature must be marked on every packing unit. Unless otherwise agreed, products which can only be stored for a limited period of time (e.g. adhesive die-cut components, lacquers, primers, adhesives, etc.) must indicate a minimum storage date of 12 months starting with the date on which they are received by the Customer. The Supplier must prove by means of a suitable medium that the product has not fallen below the valid minimum temperature during the storage and delivery process. Goods which have a shorter processing period will be rejected and/or reclaimed unless there is an explicit written agreement between the Customer's scheduling department and the Supplier.
PACKAGING AND MARKING. D-1 PACKAGING AND MARKING Packaging and marking of items to be delivered shall be in accordance with work authorization requirements or other written direction of the Contracting Officer or the Contracting Officer Representative (COR).
PACKAGING AND MARKING. (a) The Vendor is responsible, at its cost, for packing the Goods.
PACKAGING AND MARKING. D.1 PACKAGING (JUL 2001) Except for the packaging requirements for 233U and 229Th set forth in Section C, Subsection 3.6, preservation, packaging, and packing for shipment or mailing of all work delivered hereunder shall be in accordance with good commercial practices and adequate to ensure acceptance by common carrier and provide safe transportation at the most economical rate(s).
PACKAGING AND MARKING. 6.1. Packaging and marking requirements regarding a replacement brake lining assembly type, a replacement drum brake lining type or a replacement drum brake lining:
PACKAGING AND MARKING. Seller’s pricing for Goods includes packaging and marking in accordance with Seller’s standard practices. Any specific or special packaging or marking requested by Buyer and accepted by Seller may be billed as an additional charge to Buyer.
PACKAGING AND MARKING. 6.1. Replacement brake lining assemblies or replacement drum brake linings conforming to a type approved in accordance with this Regulation shall be marketed in axle sets.
