Materials and Processes Sample Clauses

Materials and Processes d. Non-Conforming Material Control
Sample 1Sample 2
AutoNDA by SimpleDocs
Materials and Processes. Information Readiness FFD shall begin supporting documents, with a focus on Materials and Processes Technical Information System (MAPTIS) research, for a System Definition Review (SDR) in accordance with the SDR definition in Appendix 4. Success criteria: MAPTIS information acquired for major system materials and processes Apr 2015
Sample 1
Materials and Processes. The prototype JTAMS will be created using GFE FUAV and JUGV with the best approximate interfaces for all critical sub-systems identified.
Sample 1
Materials and Processes. See example below. Mild steel will be used for all main components, including body and scroll. Each body component and scroll will be thoroughly cleaned and coated with a TNEMEC coating system or approved equal. The body of each sconce will be filled with exterior grade commercial tile pieces. Mosaic pieces will be affixed using one of two options: 1) resin-based adhesive with a grout filler and sealer coat (to resist graffiti and stains); or 2) acrylic latex caulk with a silicone filler (would not need a sealer coat). Scones will be hinged to allow replacement of light bulb and have an Xxxxx-set screw to prevent tampering. Artist will provide manufacturer’s specifications on screw type used. Light Unit (if applicable) See example below. Off-the-shelf exterior waterproof, UL Approved, light unit with coated die cast aluminum body and frosted glass cover. Artist will provide Civic Art Division with full manufacturer’s specification upon purchase of the units. Each unit measures 8 ¾” h x 4 ½” w x 3 ½” w.
Sample 1
Materials and Processes. 9.4 If the Contractor is required or desires to use any design, device, invention, product, material, or process covered by letters of patent or copyright, he shall provide for such use by suitable legal agreement with the patentee or patent owner and shall pay all license fees and royalties and assume all costs incident to said use in performance of the Work or incorporation of the Work. The Contractor and the surety shall indemnify and save harmless the Owner and Engineer from any and all claims for infringement by reason of the use of any such patented design, device, invention, product, material, or process or any trademark or copyright in connection with the Work agreed to be performed under this Agreement, and shall indemnify the Owner and Engineer for any costs, expense, and damages, including attorney's fees, which it may be obliged to pay for reason of any such infringement at any time during the prosecution, or after the completion of the Work.
Sample 1
Materials and Processes. 6.1 Manufacturing Processes Human dermal tissues from which GraftJacketTM is produced shall be procured in accordance with FDA regulations and AATB guidelines.
Sample 1
Materials and Processes. 35 8.1 Materials and Process Control...................................35 8.2 Organization....................................................35 8.3 Critical Materials and Processes................................35 8.4 Materials and Process Selection.................................35 8.5 Materials and Process Documentation.............................36
Sample 1
AutoNDA by SimpleDocs
Materials and Processes. 61 5.1 Scope..............................................................................................61 5.2 Policy for Control and Approval of Materials and Processes.........................................61 5.2.1 General...............................................................................61 5.2.2 Materials and Processes Control Procedures............................................62 5.2.3 Materials and Processes Lists.........................................................63 5.2.4 Request For Approval of Material (RFAM) and Process (RFAP)............................64 5.3
Sample 1
Materials and Processes. 8-1 8.1 MATERIALS AND PROCESS CONTROL..........................................8-1 8.2 ORGANIZATION...........................................................8-1 8.3 CRITICAL MATERIALS AND PROCESSES.......................................8-1 8.4 MATERIALS AND PROCESS SELECTION........................................8-1 8.5 MATERIALS AND PROCESS DOCUMENTATION....................................8-1 9 SOFTWARE QUALITY ASSURANCE......................................................9-1 9.1 SOFTWARE QUALITY ASSURANCE PLAN........................................9-1 9.2 SOFTWARE DEVELOPMENT...................................................9-1 9.3 CONFIGURATION CONTROL..................................................9-1 9.4 VERIFICATION AND ACCEPTANCE TESTING....................................9-1 9.5 NON-CONFORMANCE CONTROL................................................9-2 10 CONFIGURATION MANAGEMENT.......................................................10-1 10.1 CONFIGURATION MANAGEMENT..............................................10-1 10.2 CONFIGURATION IDENTIFICATION AND CONTROL..............................10-1 10.3
Sample 1

Related to Materials and Processes

  • Materials and Equipment ‌ Material means property that may be consumed or expended during performance, component parts of a higher assembly, or items that lose their individual identity through incorporation into an end item. Equipment means a tangible item that is functionally complete for its intended purpose, durable, nonexpendable, and needed for performance. Materials and Equipment shall be priced in accordance with the terms of the task order award, contract type, and applicable FAR and agency-specific regulatory supplements. Unless otherwise directed by task order terms and conditions, the Contractor may apply indirect costs to materials and equipment consistent with the Contractor’s usual accounting practices.

  • HAZARDOUS MATERIALS DISCLOSURES 7.1 Does your company handle an aggregate of at least 500 pounds, 55 gallons or 200 cubic feet of hazardous material at any given time? Yes ( ) No ( )

  • Materials of Environmental Concern “Materials of Environmental Concern” include chemicals, pollutants, contaminants, wastes, toxic substances, petroleum and petroleum products and any other substance that is now or hereafter regulated by any Environmental Law or that is otherwise a danger to health, reproduction or the environment.

  • Hazardous Materials Activities, Etc Each Credit Party shall promptly take, and shall cause each of its Subsidiaries promptly to take, any and all actions necessary to (i) cure any violation of applicable Environmental Laws by such Credit Party or its Subsidiaries that could reasonably be expected to have, individually or in the aggregate, a Material Adverse Effect, and (ii) make an appropriate response to any Environmental Claim against such Credit Party or any of its Subsidiaries and discharge any obligations it may have to any Person thereunder where failure to do so could reasonably be expected to have, individually or in the aggregate, a Material Adverse Effect.

  • Hazardous Materials Activities The Company has not transported, stored, used, manufactured, disposed of, released or exposed its employees or others to Hazardous Materials in violation of any law in effect on or before the Effective Time, nor has the Company disposed of, transported, sold, or manufactured any product containing a Hazardous Material (any or all of the foregoing being collectively referred to as "Hazardous Materials Activities") in violation of any rule, regulation, treaty or statute promulgated by any Governmental Entity in effect prior to or as of the date hereof to prohibit, regulate or control Hazardous Materials or any Hazardous Material Activity.

  • MARKETING MATERIALS AND REPRESENTATIONS (a) The Participant represents and warrants that it will not make any representations concerning a Fund, Creation Units or Shares, other than those consistent with the Prospectus or any Marketing Materials (as defined below) furnished to the Participant by the Distributor.

  • Reverse Engineering The Customer must not reverse assemble or reverse compile or directly or indirectly allow or cause a third party to reverse assemble or reverse compile the whole or any part of the software or any products supplied as a part of the Licensed System.

  • No Reverse Engineering You may not, and you agree not to or enable others to, copy (except as expressly permitted by this License or by the Usage Rules if they are applicable to you), decompile, reverse engineer, disassemble, attempt to derive the source code of, decrypt, modify, or create derivative works of the Apple Software or any services provided by the Apple Software, or any part thereof (except as and only to the extent any foregoing restriction is prohibited by applicable law or to the extent as may be permitted by the licensing terms governing use of open-sourced components included with the Apple Software).

  • Materials (Confirm each bullet point and sign below) ▪ Vendor claims some Vendor Data confidential to the extent permitted by T GC Chapter 552 and other applicable law. Vendor claims some Vendor Data confidential to the xtent permitted by TGC Chapter 552 and other applicable law. ▪ Vendor attached to this PDF all potentially confidential Vendor Data and listed the number of attached pages below. ▪ Vendor’s authorized signatory has signed below and shall upload this document in the proper location in the eBid System. ▪ Vendor agrees that TIPS shall not be liable for any release of confidential information required by law. Number of pages attached deemed confidential: Authorized Signature: (Confir ch bullet point and sig bel ) ( Confirm each bullet point and sign below By signing for Option 2 below, V endor ex pressly waives any confidentiality claim for all Vendor Data submitted in relation to this proposal and resulting contract. Vendor confirms that By signing for Option 2 below, V or e pressly waives any confidentiality claim for all Vendor Da ubmitted in relation TIPS may freely release Vendor Data submitted in relation to this proposal or resulting contract to any requestor. Vendor agrees that TIPS shall not be responsible or liable for any use or distribution of Vendor Data by TIPS or TIPS Members. ▪ Vendor’s authorized signatory has signed below and shall upload this document in the proper location in the eBid System. ▪Vendor agrees that TIPS shall not be liable for any release of confidential information required by law.

Time is Money Join Law Insider Premium to draft better contracts faster.