Contractor Safety Programs Sample Clauses

Contractor Safety Programs. CM shall review safety programs of the Contractor for conformity with requirements of the Construction Documents and applicable law; CM shall monitor the Contractors’ compliance with their respective safety programs and advise the District of measures, if any, necessary or appropriate to obtain the Contractors’ compliance. By undertaking the obligations hereunder, CM shall not be deemed to have assumed responsibility for the adequacy or sufficiency of safety programs implemented by Contractor, but the CM is responsible for verifying that the Contractor has established a safety program, that the safety program established by the Contractor is in compliance with the Construction Documents and applicable law, rule or regulation and that the Contractor implements its safety program during construction of the Assigned Project.
AutoNDA by SimpleDocs
Contractor Safety Programs. The Construction Manager shall review the safety programs developed by each Trade Contractor for purposes of assisting in the coordination of safety programs with those of other contractors. The Construction Manager's responsibilities for assisting in the coordination of these multiple safety programs shall not extend to direct control over or charge of the acts or omissions of the Trade Contractors, subcontractors, agents or employees of the Trade Contractors or subcontractors or any other persons performing portions of the Project not directly employed by the Construction Manager. The Construction Manager shall take all necessary precautions for the safety of its employees and comply with all applicable safety laws and building codes to prevent accidents or injuries to its employees. Any incident costs associated with the Construction Manager's Safety Person(s), including responses to emergency situations, shall be included in this Agreement. No additional compensation will be provided for these costs.

Related to Contractor Safety Programs

  • Safety Program The Contractor shall design a specific safety program for the Work for the site(s). The Contractor shall establish and require all Subcontractors to establish reasonable safety programs. The Contractor shall also submit its standard monthly safety reports to the Owner and Design Professional. No imposition of responsibility on the Contractor for safety under this Contract shall relieve any subcontractor of its responsibility for safety of persons or property on or near the Project Site. The Contractor shall include in his plant he names of the person in charge of Safety.

  • Contractor Work Hours and Safety Standards Contractor shall ensure compliance with all safety and hourly requirements for employees, in accordance with federal, state, and County safety and health regulations and laws.

  • Drug and Alcohol Testing – Safety-Sensitive Functions A. Employees required to have a Commercial Driver’s License (CDL) are subject to pre-employment, post-accident, random and reasonable suspicion testing in accordance with the U.S. Department of Transportation rules, Coast Guard Regulations (46 CFR Part 16) or the Federal Omnibus Transportation Employee Testing Act of 1991. The testing will be conducted in accordance with current Employer policy.

  • CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.

  • Safety Plan Developer’s safety plan specifically adapted for the Project. Developer's Safety Plan shall comply with all provisions regarding Project safety, including all applicable provisions in these Construction Provisions.

  • Contractor Key Personnel ‌ The Contractor shall assign a Corporate OASIS Program Manager (COPM) and Corporate OASIS Contract Manager (COCM) as Contractor Key Personnel to represent the Contractor as primary points-of-contact to resolve issues, perform administrative duties, and other functions that may arise relating to OASIS and task orders solicited and awarded under XXXXX. Additional Key Personnel requirements may be designated by the OCO at the task order level. There is no minimum qualification requirements established for Contractor Key Personnel. Additionally, Contractor Key Personnel do not have to be full-time positions; however, the Contractor Key Personnel are expected to be fully proficient in the performance of their duties. The Contractor shall ensure that the OASIS CO has current point-of-contact information for both the COPM and COCM. In the event of a change to Contractor Key Personnel, the Contractor shall notify the OASIS CO and provide all Point of Contact information for the new Key Personnel within 5 calendar days of the change. All costs associated with Contractor Key Personnel duties shall be handled in accordance with the Contractor’s standard accounting practices; however, no costs for Contractor Key Personnel may be billed to the OASIS Program Office. Failure of Contractor Key Personnel to effectively and efficiently perform their duties will be construed as conduct detrimental to contract performance and may result in activation of Dormant Status and/or Off-Ramping (See Sections H.16. and H.17.).

  • Health and Safety Plan 5. Xxxxxxx shall prepare and submit under separate cover from the Work Plan, a Health and Safety Plan consistent with Occupational Safety and Health Administration regulations. The Health and Safety Plan shall be submitted to the Department in the form of one electronic copy on compact disk (in .pdf format). Xxxxxxx agrees that the Health and Safety Plan is submitted to the Department only for informational purposes. The Department expressly disclaims any liability that may result from implementation of the Health and Safety Plan by Xxxxxxx. PUBLIC PARTICIPATION

  • E-Verify Program Grantee certifies that it utilizes and will continue to utilize the U.S. Department of Homeland Security's E-Verify system to determine the eligibility of:

Time is Money Join Law Insider Premium to draft better contracts faster.