Unit of Work definition

Unit of Work and “Unit” means a unit of work described as such in Paragraph 1.3;
Sample 1Sample 2Sample 3
Unit of Work conversion unit for different exploratory works used for the purpose of assessing implementation of the Minimum Exploration Program provided for in Annex II.
Sample 1Sample 2Sample 3
Unit of Work means the unit agreed on as being the basis for payment of an employee employed under a contract for piece-rate work.
Sample 1Sample 2Sample 3

Examples of Unit of Work in a sentence

  • The percentage of the total lump sum fee that represents the ratio of Work completed to the total amount of Work; Cost Plus Fixed Fee Contracts: Incurred cost of actual Work performed plus a percentage of the fixed fee that represents the ratio of Work completed to the total amount of Work; Specific Rate of Compensation Contract: Incurred cost of actual Work performed; Per Unit of Work Contract: The cost of each completed unit of Work and/or a percentage of each partially completed unit of Work.

  • The percentage of the total lump sum fee that represents the ratio of Work completed to the total amount of Work; Specific Rate of Compensation Contract: Incurred cost of actual Work performed; Per Unit of Work Contract: The cost of each completed unit of Work and/or a percentage of each partially completed unit of Work.

  • Unit of Work Rates shall be paid for each unit of work in which the equipment participates, and the amount of rental shall, unless otherwise agreed in writing be determined by the number of units shown in the supervising engineer’s or architect’s estimates.

  • A prime consultant is required to have an audited FAR overhead rate on file with PennDOT prior to submitting a price proposal using Lump Sum, Cost per Unit of Work, or Specific Rate of Compensation methods of payment.

  • For an agreement where the estimated direct plus indirect payroll cost for the subconsultant is more than $250,000, a subconsultant is required to have an audited FAR overhead rate on file with PennDOT prior to submitting a price proposal using Lump Sum, Cost per Unit of Work, or Specific Rate of Compensation methods of payment.

  • The owner agrees to pay the consultant as compensation for professional services furnished under Section B and in accordance with the “General Provisions,” a lump sum for each unit of work performed as follows: Unit of Work Time (Calendar Days) Fee (Lump Sum) a.

  • The Cost per Unit of Work Method is used when the SOW is well-defined, the consulting effort per unit can be estimated accurately, and there are a repetitive number of similar units to be performed.

  • Cost Per Unit of Work Payment - The consultant shall follow the same provisions as for the Lump Sum payment above for each Unit of Work to establish the interim progress percentage.

  • Exhibit A-1 Supplement CLIENT: Grant County PROJECT: 2023 Gravel Roads Upgrades Prioritization Consultant Fee Determination - Cost Per Unit of Work 5/17/2023 Estimated Hours JJC Principal Engineer Tech.

  • The four methods are Lump Sum Compensation, Costs Plus a Net Fee Compensation, Rate of Pay Compensation and Unit of Work Compensation, all as defined in Chapter 1 of the Specifications.


More Definitions of Unit of Work

Unit of Work conversion unit for different exploratory works used for the purposes of measuring the implementation of the Minimum Exploratory Program laid down in Annex II. Second Clause - Purpose Oil and Natural Gas Exploration and Production The purpose of this contract is: the implementation, in the Concession Area, of Exploration Operations involved in the Minimum Exploratory Program or additional to it; in the event of Discovery, at the discretion of the Concessionaire, the implementation of Discovery Assessment activities in the terms of a Discovery Assessment Plan approved by ANP; If the Discovery is found as commercial by the Concessionaire, the production of Oil and Natural Gas in the Concession Area in accordance with a development plan approved by ANP. Costs, Losses and Risks Associated with the Execution of Operations The Concessionaire will exclusively always bear all the costs and risks related to the implementation of operations and its consequences. The Concessionaire must bear all losses it may incur, including those resulting from unforeseen circumstances or force majeure and accidents or events of nature that affect the Oil and Natural Gas Exploration and Production in the Concession Area. The Concessionaire will not be entitled to any payment, compensation, refund, reimbursement or compensation in the event of failure or absence of commerciality of any Discoveries in the Concession Area. The Concessionaire will be the only responsible party civilly liable for its own actions and those of its employees and subcontractors, as well as the repair of any damage caused by operations and its execution, regardless of fault. The Federal Government and ANP should be compensated in the burden they will endure as a result of any demands motivated by acts of responsibility of the Concessionaire, who will assume that reparation. The Federal Government and ANP will not assume any risk or operating losses, nor respond to costs, investments and damage associated with the execution of operations and its consequences. Ownership of the Oil and/or Natural Gas The deposits of Petroleum and Natural Gas existing in the national territory, on the continental shelf and in the exclusive economic zone belong to the Federal Government, in accordance with article 20, section V and IX of the Federal Constitution and article 3 of Law no. 9,478/97. The Dealer will have the sole ownership of the Oil and Natural Gas that may be effectively produced and conferred to it on the Producti...
Sample 1
Unit of Work conversion unit for different exploratory works used for the purposes of measuring the implementation of the Minimum Exploratory Program laid down in Annex II. Clause two - Objective Oil and Natural Gas Exploration and Production The purpose of this contract is: The Implementation, in the Concession Area, of Exploration Operations involved in the Minimum Exploratory Program or additional to it; In the event of Discovery, at the discretion of the Concessionaire, the implementation of Discovery Assessment activities in the terms of a Discovery Assessment Plan approved by ANP; Once the Discovery is considered as commercially findings by the Concessionaire, the production of Oil and Natural Gas in the Concession Area shall be deemed in accordance with a development plan approved by ANP.
Sample 1

Related to Unit of Work

  • Completion of work means completion of the entire contracted work. Exhaustion of quantity of any particular item mentioned in the bid document shall not imply completion of work or any component thereof.

  • start of works means the earlier of either the start of construction works relating to the investment, or the first legally binding commitment to order equipment or any other commitment that makes the investment irreversible. Buying land and preparatory works such as obtaining permits and conducting feasibility studies are not considered start of works. For take-overs, ‘start of works’ means the moment of acquiring the assets directly linked to the acquired establishment;

  • Statement of Work means the description of activities performed in completing the Project, as specified in the Contract and as may be amended.

  • Programme of work means the Programme of work submitted by the contractor and approved by the Engineer-in-charge and includes and amendment thereto made from time to time and approved by the Engineer-in-charge;

  • Scope of Work means the description of Services and Deliverables specified in the Contract and as may be amended.

  • Work Order means an individually negotiated document that is executed by both Parties and which authorizes a Project, if any, in an indefinite quantity Contract.

  • SOW means the document specifying, without limitation, the scope, objective, and time frame of the Work that Supplier will perform for Cisco.

  • Task Order means a separate order issued under this Contract.

  • hours of work means time during which seafarers are required to do work on account of the ship;

  • Project Plan means the document to be developed by the Contractor and approved by Webel Technology Ltd., based on the requirements of the Contract and the Preliminary Project Plan included in the Contractor’s bid. For the sake of clarity, the Agreed and Finalized Project Plan” refers to the version of the Project Plan submitted by the contractor after receiving the letter of Award and the same approved by Webel Technology Ltd. The project plan may be changed/ modified during the course of the project. Should the Project Plan conflict with the provisions of the Contract in any way, the relevant provisions of the Contract, including any amendments, shall prevail.

  • Stop Work Order means the written Notice, delivered in accordance with this Agreement, by which the State may require the Contractor to stop all, or any part, of the Work of this Agreement, for the period set forth in the Stop Work Order. The Stop Work Order shall be specifically identified as such and shall indicate that it is issued pursuant to the Stop Work provision in this Exhibit B.