Sealant primer definition

Sealant primer means any product intended by the manufacturer for application to a substrate, prior to the application of a sealant, to enhance the bonding surface.
Sealant primer means any product specified by the manufacturer to be applied to a substrate, prior to the application of a sealant, to enhance the bonding surface.

Examples of Sealant primer in a sentence

  • Manufactures Sealant primer shall be applied to all joints before sealant is applied.

  • Table H-8a: Hexavalent Chromium Applications Used in the Manufacture of the F-35 Air System• Fuel tank coating to AMS-C-27725 Type 2• Sealant to LMA-MU065• Sealant primer to LMA-MR058 Form 1• Adhesive bonding primer to LMA-MD007 Type 2 or 2ZZZ00002 Type 2• General structural primer to MIL-PRF-23377• Non-Curing Corrosion Resistant Sealing Compound PERFORMANCE BASED PAYMENTS (a) Performance-based payments shall form the basis for contract financing payments, if such payments are provided under this contract.

  • Contractor shall notify Purchaser of requirements (voltage, current, etc.) prior to mobilization.

  • Sealant primer: MasterSeal Primer P173 and P176 or as required by coating manufacturer.

  • Table H-9a: Hexavalent Chromium Applications Used in the Manufacture of the F-35 Air System Fuel tank coating to AMS-C-27725 Type 2 Sealant to LMA-MU065 Sealant primer to LMA-MR058 Form 1 Adhesive bonding primer to LMA-MD007 Type 2 or 2ZZZ00002 Type 2 General structural primer to MIL-PRF-23377 Non-Curing Corrosion Resistant Sealing Compound 3202 (10/19/20) 6531135399 N00019-20-C-0009 Lot 16 EOQ The following additional clauses apply to this Contract.

  • Sealant primer – any product intended by the manufacturer to be applied to a substrate, before the application of a sealant, to enhance the bonding surface.

Related to Sealant primer

  • Sealant means any material with adhesive properties that is formulated primarily to fill, seal, waterproof or weatherproof gaps or joints between two surfaces. Sealants include sealant primers and caulks.

  • Primer means a coating labeled and formulated for application to a substrate to provide a firm bond between the substrate and subsequent coats.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Cathode ray tube or “CRT” means a vacuum tube, composed primarily of glass, which is the visual or video display component of an electronic device. A “used, intact CRT” means a CRT whose vacuum has not been released. A “used, broken CRT” means glass removed from its housing or casing whose vacuum has been released.

  • Halogen means one of the chemical elements chlorine, bromine or iodine.

  • LDPE means low density polyethylene, labeled by the SPI code #4.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Anaerobic digestion ’ means a controlled process involving microbial decomposition of organic matter in the absence of oxygen ;

  • Encapsulant means a substance that forms a barrier between lead-based paint and the environment using a liquid-applied coating (with or without reinforcement materials) or an adhesively bonded covering material.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • manoeuvring area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, excluding aprons;

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Riprap means small, broken stones or boulders placed compactly or irregularly on dykes or similar embankments for protection of earth surfaces against wave action or current;

  • apron means a defined area intended to accommodate aircraft for purposes of loading or unloading passengers, mail or cargo, fuelling, parking or maintenance;

  • Air-purifying respirator means a respirator with an air-purifying filter, cartridge, or canister that removes specific air contaminants by passing ambient air through the air-purifying element.

  • SFTR means Regulation (EU) 2015/2365 of the European Parliament and of the Council of 25 November 2015 on transparency of securities financing transactions and of reuse and amending Regulation (EU) No 648/2012;

  • DIA means the department of inspections and appeals established in Iowa Code chapter 10A.