Examples of Module in a sentence
Figure 5-1: CFP8 Module & CFP8 Module Mated in Single and Dual Port Systems Figure 5-2 is an overview of the CFP8 mechanical assembly of the constituent elements.
Table 2-1: Hardware Control Pins Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 96 TX_DIS (PRG_CNTL1) Transmitter Disable (Optionally configurable as Programmable Control after Reset1) I 3.3V LVCMOS Disable2 Enable2 Pull – Up3 94 MOD_LOPWR Module Low Power Mode I 3.3V LVCMOS Low Power Enable Pull – Up3 88 MOD_RSTn Module Reset, Active Low (invert) I 3.3V LVCMOS Enable Reset Pull – Down4 1 When Programmable Control is configured, MSA Default is TX_DIS.
The CFP8 Module supports alarm, control and monitor functions via an MDIO bus.
Table 2-3: Management Interface Pins (MDIO) Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 89 GLB_ALRMn Global Alarm O 3.3V LVCMOS OK Alarm 92 MDC MDIO Clock I 1.2V LVCMOS 91 MDIO Management Data Input Output Bi-Directional Data I/O 1.2V LVCMOS 90 MOD_SELn Module Select I 3.3V LVCMOS De- select Select Pull-Up3 3 Pull-Up resistor (4.7 kOhm to 10 kOhm) is located within the CFP8 module For CFP8, the MOD_SELn pin replaces the PRTADR pins used on CFP/CFP2/CFP4.
Unit Notes Maximum Insertion Force 80 N Without Heat Sink Maximum Extraction Force 50 N Without Heat Sink Minimum Module Retention Force 90 N No damage to module below 90 N Minimum Cage Retention Force 180 N No damage to cage latch below 180 N Minimum rating for host/module connector insertion/extraction is 200 cycles.