Density means the permitted number of dwelling units per
medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;
Maximum design heat input means the ability of a unit to combust a stated maximum amount of fuel per hour on a steady state basis, as determined by the physical design and physical characteristics of the unit.
piece-work means any work the pay for which is estimated by the amount of work performed irrespective of the time occupied in its performance;
Parking Structure means a Building, or any part thereof, principally used for the parking of motor vehicles;
Intensity means the number of Program Unique Supervised Hours divided by the Duration for a course or qualification, being a measure of the concentration of training and assessment delivered from the Eligible Individual’s perspective.
Lightweight means the displacement of a ship in metric tons without cargo, fuel, lubricating oil, ballast water, fresh water and feed water in tanks, consumable stores, and passengers and crew and their effects.
Zero tolerance means that the school will not tolerate the possession of any weapon by any person. The term “weapon” is defined as any object or substance which by its design, threatened use, or use could cause bodily injury or property damage, including any object which could reasonably be mistaken for a weapon. The division director and dean of student life shall use their discretion when interpreting the use and intent of such articles at school.
High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).
Grading means the movement or redistribution of the soil, sand, rock, gravel, sediment, or other material on a site in a manner that alters the natural contour of the land.
Outputs means the goods or services that are produced by an entity or other person;
Tolerance means a state of adaptation in which exposure to a drug induces changes that result in a diminution of one or more of the drug’s effects over time.
Permeability of a space means the ratio of the volume within that space which is assumed to be occupied by water to the total volume of that space.
Design pressure means the hydrostatic pressure for which each structure or appliance assumed watertight in the intact and damage stability calculations is designed to withstand.
Calibration gas means a gas mixture used to calibrate gas analysers.
Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.
Noise means two times the root mean square of ten standard deviations, each calculated from the zero responses measured at a constant frequency which is a multiple of 1,0 Hz during a period of 30 seconds.
danger area means an airspace of defined dimensions within which activities dangerous to the flight of aircraft may exist at specified times;
Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;
Enhanced coagulation means the addition of sufficient coagulant for improved removal of disinfection byproduct precursors by conventional filtration treatment.
Structures means an elevated road or a flyover, as the case may be;