MAINTENANCE AND INSPECTIONS definition

MAINTENANCE AND INSPECTIONS. If specified in the Product manufacturer’s warranty and/or owner’s manual, You must perform all of the care, maintenance and inspections for the Product as indicated. Proof of the completion of such maintenance, care and/or inspection services may be required at time of Claim. IMPORTANT PRODUCT INFORMATION In the event Your original Covered Product is ever exchanged by the manufacturer or Retailer, please call toll free 0-000-000-0000 as soon as possible to update Your coverage information with the make, model, and serial number of the exchanged product. (NOTE: Your original Agreement Term does not extend in these cases) AGREEMENT TERM – EFFECTIVE DATE OF COVERAGE COVERAGE under Your Plan becomes effective at different times; depending on whether Your Claim is: (a) a Failure that is still covered under the manufacturer’s warranty; (b) a Failure that is no longer covered under the manufacturer’s warranty because it has expired; or (c) a covered occurrence that is NOT a defined Failure (such as an ADH event, a Power Surge event, or Food Loss event).
Sample 1Sample 2Sample 3
MAINTENANCE AND INSPECTIONS. If specified in the Device manufacturer’s warranty and/or owner’s manual, You must perform all of the care, maintenance and inspections for the Device as indicated. You may be required to provide proof of fulfilment of such maintenance, care and/or inspection services at time of claim. ANY CLAIM RESULTING FROM THE LACK OF COMPLIANCE WITH THE PRODUCT MANUFACTURER’S WARRANTY AND/OR OWNER’S MANUAL WILL NOT BE COVERED UNDER THIS CONTRACT. Limitation of Liability TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, SERVIFY AND ITS EMPLOYEES AND AGENTS WILL UNDER NO CIRCUMSTANCES BE LIABLE TO YOU OR ANY SUBSEQUENT OWNER OF THE COVERED DEVICE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO THE COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA OR THE FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA, ANY LOSS OF BUSINESS, PROFITS, REVENUE OR ANTICIPATED SAVINGS, RESULTING FROM XXXXXXX’S OBLIGATIONS UNDER THIS PLAN. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE LIMIT OF SERVIFY AND ITS EMPLOYEES’ AND AGENTS’ LIABILITY TO YOU AND ANY SUBSEQUENT OWNER ARISING UNDER THE PLAN SHALL NOT EXCEED THE ORIGINAL PRICE PAID FOR THE PLAN. SERVIFY SPECIFICALLY DOES NOT WARRANT THAT (i) IT WILL BE ABLE TO REPAIR OR REPLACE THE COVERED DEVICE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA, (ii) IT WILL MAINTAIN THE CONFIDENTIALITY OF DATA, OR (iii) THAT THE OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR-FREE. THE BENEFITS CONFERRED BY THIS PLAN ARE IN ADDITION TO ANY RIGHTS AND REMEDIES PROVIDED UNDER CONSUMER LAWS AND REGULATIONS. TO THE EXTENT THAT LIABILITY UNDER SUCH LAWS AND REGULATIONS MAY BE LIMITED, SERVIFY’S LIABILITY IS LIMITED, AT ITS SOLE OPTION, TO REPLACEMENT OR REPAIR OF THE COVERED DEVICE OR SUPPLY OF THE SERVICE. SOME STATES OR PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SOME OR ALL OF THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Sample 1Sample 2
MAINTENANCE AND INSPECTIONS. If specified in the Device manufacturer’s warranty and/or owner’s manual, You must perform all of the care, maintenance and inspections for the Device as indicated. You may be required to provide proof of fulfilment of such maintenance, care and/or inspection services at time of claim. ANY CLAIM RESULTING FROM THE LACK OF COMPLIANCE WITH THE PRODUCT MANUFACTURER’S WARRANTY AND/OR OWNER’S MANUAL WILL NOT BE COVERED UNDER THIS CONTRACT.
Sample 1

Examples of MAINTENANCE AND INSPECTIONS in a sentence

  • MAINTENANCE AND INSPECTIONS – Some items, such as major appliances, require certain maintenance and/or inspection servicesfrom time to time.

  • VISITORS CONTRACTORS CONDUCTING ESSENTIAL MAINTENANCE AND INSPECTIONS Contractors conducting maintenance and inspections must be allowed to enter our sites to conduct their roles.

  • MAINTENANCE AND INSPECTIONS: If specified in the Covered Product’s manufacturer’s warranty and/or owner’s manual, You must perform all the care, maintenance and inspections for the Covered Product as indicated.

  • MAINTENANCE AND INSPECTIONS – Some items, such as major appliances, require certain maintenance and/or inspection services from time to time.

  • Non-routine Sampling Non-routine sampling is conducted for short-term operations as necessary or when requested by laboratory employees.7. HOUSEKEEPING, MAINTENANCE, AND INSPECTIONS A.

  • MAINTENANCE AND INSPECTIONS: If specified in the Covered Product’s manufacturer’s warranty and/or owner’s manual, You must perform all of the care, maintenance and inspections for the Covered Product as indicated.

  • WARNING: RECOMMENDED INTERVAL MAINTENANCE AND INSPECTIONS ARE CRITICAL TO OPERATOR SAFETY AND A PROPERLY PERFORMING MOTORCYCLE.

  • Cc: Tracey Sanders, Deputy Director R E S O L U T I O N SCOTT EMERGENCY COMMUNICATION CENTER BOARD June 20, 2019 A REOLUTION APPROVING A THREE YEAR SERVICE CONTRACT FOR UPS MAINTENANCE AND INSPECTIONS AND AWARDING IT TO VERITIV, INC.

  • C.6.2.14 YEARLY MAINTENANCE AND INSPECTIONS (Target) C.6.2.14.1 The Contractor shall inspect and transport vehicles and equipment to the DC Inspection Station on an annual basis or as required (ie): windshield replacements) to maintain MPD vehicles in accordance with Federal and District of Columbia requirements inspection related repairs shall be coordinated by the Contractor in the Maintenance Facility by properly authorized and trained technicians.

  • AXA reserves the right to amend such terms and conditions thereof from time to time without prior notice.

Related to MAINTENANCE AND INSPECTIONS

  • Maintenance and Support means updates, upgrades, patches, fixes, etc. and technical support provided for the Products and Services that Supplier is required to provide directly to DXC or a DXC Customer.

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • Routine maintenance means activities to keep an impervious surface as near as possible to its constructed condition. This includes ordinary maintenance activities, resurfacing paved areas, and exterior building changes or improvements which do not materially increase or concentrate stormwater runoff, or cause additional nonpoint source pollution.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under §175A of the CAA, as amended.

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production. Manual Load Dump Action:

  • Inspections has the meaning set forth in Section 4.1.2.

  • Operation and Maintenance or “O&M” shall mean all activities required to operate, maintain, and monitor the effectiveness of the RA as specified in the SOW or any EPA-approved O&M Plan.

  • Maintenance work means the repair of existing facilities when the size, type or extent of such facilities is not thereby changed or increased. While “maintenance” includes painting and decorating and is covered under the law, it does not include work such as routine landscape maintenance or janitorial services.

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • Operations and maintenance means a project delivery method in which the District enters into a single contract for the routine operation, routine repair, and routine maintenance of an infrastructure facility.

  • Maintenance and Support Services means the services provided by Contractor under Appendix F.

  • Operation and Maintenance Expenses or ‘O&M expenses' means the expenditure incurred on operation and maintenance of the project, or part thereof, and includes the expenditure on manpower, repairs, spares, consumables, insurance and overheads;

  • Operation and Maintenance Costs means the costs of:

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Maintenance Window means the total minutes in the reporting month represented by the following day(s) and time(s) during which vendor shall maintain the services: [day(s) and time(s)].

  • maintenance order , in relation to a court, means an order made by a court —

  • Maintenance and Operations Revenue or “M&O Revenue” means (i) those revenues which the District receives from the levy of its annual ad valorem maintenance and operations tax pursuant to Section 45.002 of the TEXAS EDUCATION CODE, or other lawful authority, and Article VII § 3 of the TEXAS CONSTITUTION, plus (ii) all State revenues to which the District is or may be entitled under the applicable provisions of the TEXAS EDUCATION CODE or any other statutory provision as well as any amendment or successor statute to these provisions, as applicable, less

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Emergency Maintenance means any period of maintenance for which, due to reasons beyond its reasonable control, Sprint Convergence is unable to provide prior notice of.

  • Maintenance With respect to any Cooperative Unit, the rent paid by the Mortgagor to the Cooperative Corporation pursuant to the Proprietary Lease.

  • Maintenance Schedule means a document which describes the specific scheduled maintenance tasks and their frequency of completion necessary for the safe operation of those aircraft to which it applies;

  • Maintenance Costs means parts and materials, sublet and labour costs of a qualified licensed mechanic for the maintenance of the Revenue Service Vehicles, but shall not include costs associated with interior and exterior transit advertising signs and non-mechanical servicing of Revenue Service Vehicles such as fuelling, clearing fareboxes, cleaning and painting wheel rims, vehicle washing and other work performed by a serviceman; and,

  • Software Maintenance means the process of modifying software after delivery to correct faults, improve performance or other attributes, or adapt to a changed environment. (Reference ISO/IEC 14764:2006, as amended or superseded.) Software maintenance does not include any customization or configuration.

  • Major maintenance means the adjustment, repair or replacement of a component or module that could affect the accuracy of a measurement.

  • Prosecution and Maintenance means, with regard to a particular Patent, the preparation, filing, prosecution and maintenance of such Patent, as well as re-examinations, reissues and the like with respect to that Patent, together with the conduct of interferences, the defense of oppositions and other similar proceedings with respect to that Patent.

  • Maintenance Term means the period of time for which Customer has purchased Maintenance Services, as evidenced by the Purchase Order delivered by Customer in connection therewith, together with all renewals effected in accordance with Section 4 of this Agreement.