Iron or steel products definition

Iron or steel products means articles, materials, or supplies that consist wholly or predominantly of iron or steel or a combination of both.
Sample 1Sample 2Sample 3
Iron or steel products means articles, materials, or supplies that consist wholly or predominantly of iron or steel or a combination of both. “Manufactured products” means: (1) Articles, materials, or supplies that have been: (i) Processed into a specific form and shape; or (ii) Combined with other articles, materials, or supplies to create a product with different properties than the individual articles, materials, or supplies. (2) If an item is classified as an iron or steel product, a construction material, or a Section 70917(c) material under 2 CFR 184.4(e) and the definitions set forth in 2 CFR 184.3, then it is not a manufactured product. However, an article, material, or supply classified as a manufactured product under 2 CFR 184.4(e) and paragraph (1) of this definition may include components that are construction materials, iron or steel products, or Section 70917(c) materials. “Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components.
Sample 1
Iron or steel products meansUnited States is greater than 55 percent of the total cost of all components of the manufactured product.(2) An article, material, or supply shall only be classified as an iron or steel product, a manufactured product, or other products as specified by law or in 2 CFR part 184. An iron or steel product must meet the requirements of paragraph (b) of this section. Except as otherwise provided in this paragraph (c), an article, material, or supply shall not be considered to fall into multiple categories. In some cases, an article, material, or supply may not fall under any of the above-listed categories. The classification of an article, material, or supply as falling into one of the categories listed in this paragraph (c) must be made based on its status at the(ii) For components manufactured by the manufacturer, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (a) of this section, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the manufactured product.(4) The provisions of this paragraph(c) are separate and severable from one another and from the other provisions of this section. If any provision is stayedor determined to be invalid, the remaining provisions shall continue in effect.* * * * *[FR Doc. 2024–05182 Filed 3–11–24; 8:45 am]BILLING CODE 4910–22–Particles, materials, or supplies thatconsist wholly or predominantly of irontime it is brought to the work site for incorporation into an infrastructureor steel or a combination of both.
Sample 1

Examples of Iron or steel products in a sentence

  • Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified, according to their form, their composition and their appearance, in the headings of this Chapter appropriate to similar hot-rolled products.

  • Iron or steel products is defined in 2 CFR 184.3 and means articles, materials, or supplies that consist wholly or predominantly of iron or steel or a combination of both.

  • Regulation (EU) 2019/1009 of the European Parliament and of the Council laying down rules on the making available on the market of EU fertilizing products.See: http://data.europa.eu/eli/reg/2019/1009/2023-03-16• Annex II, Section 3 Production routes, system boundaries, and relevant precursors, as specified in sub-section: 3.11 – Sintered ore; 3.12 – Ferro-manganese, Ferro-chromium, Ferro-nickel; 3.13 – Pig iron; 3.14 – DRI; 3.15 – Crude steel; 3.16 – Iron or steel products.

  • Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified according to their form, their composition and their appearance, in the headings of this chapter appropriate to similar hot-rolled products.

  • See also paragraphs (c) and (d) of § 184.4. Iron or steel products means articles, materials, or supplies that consist wholly or predominantly of iron or steel or a combination of both.

  • An article, material, or supply should only be classified into one of the following categories: (i) Iron or steel products; (ii) Manufactured products; (iii) Construction materials; or (iv) Section 70917(c) materials.

  • Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified according to their form, their composition and their appearance, in the headings of this chapter appropriate to similar hot-rolled products.XV 72-4 Subheading Notes 1.

  • It can only impact products that are made in the United States as follows: Iron or steel products where the cost of foreign iron and steel is 5 percent or more of the cost of all components in the product; or other products, other than COTS items, that have a content of 45 to 50 percent foreign components.

  • Iron or steel products; (ii) Manufactured products; (iii) Construction materials; or (iv) Section 70917(c) materials.

  • Economic future benefit can be understood in all types of increase in revenue but also future cost decreases according to paragraph 17.


More Definitions of Iron or steel products

Iron or steel products means articles, materials, or supplies that consist wholly or predominantly of iron or steel or a combination of both. “Buy America preference” means the “domestic content procurement preference” set forth in section 70914 of the Build America, Buy America Act, which requires the head of each Federal agency to ensure that none of the funds made available for a Federal award for an infrastructure project may be obligated unless all of the iron, steel, manufactured products, and construction materials incorporated into the project are produced in the United States.
Sample 1

Related to Iron or steel products

  • Steel Products means products rolled, formed, shaped, drawn, extruded, forged, cast, fabricated or otherwise similarly processed, or processed by a combination of two or more or such operations, from steel made by the open heath, basic oxygen, electric furnace, Bessemer or other steel making process.

  • Hemp products means all products made from industrial hemp,

  • Commercial Product means any such product as defined in FAR 2.101.

  • Manufactured products means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber.

  • Financial Product means any securities, futures contracts or leveraged foreign exchange contracts as defined under the SFO. Regarding “leveraged foreign exchange contracts”, it is only applicable to those traded by persons licensed for Type 3 regulated activity.

  • Tobacco products means cigars, cigarettes, cheroots, stogies, periques, granulated, plug cut, crimp cut, ready rubbed, and other smoking tobacco, snuff, snuff flour, moist snuff, cavendish, ping and twist tobacco, fine-cut and other chewing tobaccos, shorts, refuse scraps, clippings, cuttings and sweepings of tobacco, and other kinds and forms of tobacco, prepared in such manner as to be suitable for chewing or smoking in a pipe or otherwise, or both for chewing and smoking.

  • Aerosol product means a pressurized spray system that dispenses product ingredients by means of a propellant contained in a product or a product's container, or by means of a mechanically induced force. “Aerosol Product” does not include “Pump Spray.”

  • Financial Products “Development Services”; “Target Market”; “Investment Areas”; and “Targeted Populations” have the meanings ascribed to such terms in 12 C.F.R. 1805.104.

  • Tobacco product means any substance containing tobacco leaf, including but not limited to, cigarettes, cigars, pipe tobacco, hookah tobacco, snuff, chewing tobacco, dipping tobacco, bidis, blunts, clove cigarettes, or any other preparation of tobacco; and any product or formulation of matter containing biologically active amounts of nicotine that is manufactured, sold, offered for sale, or otherwise distributed with the expectation that the product or matter will be introduced into the human body by inhalation; but does not include any cessation product specifically approved by the U.S. Food and Drug Administration for use in treating nicotine or tobacco dependence.

  • Products means information resources technologies that are, or are related to, EIR.

  • Competitive Products shall include any product or service that directly or indirectly competes with, is substantially similar to, or serves as a reasonable substitute for, any product or service in research, development or design, or manufactured, produced, sold or distributed by the Company;