Examples of Hot Mix Asphalt in a sentence
ParameterRASNo. 8 (2.36 mm)± 5 %No. 16 (1.18 mm)± 5 %No. 30 (600 µm)± 4 %No. 200 (75 µm)± 2.5 %Asphalt Binder Content± 2.0 % If any individual sieve and/or asphalt binder content tests are out of the above tolerances when compared to the average used for the mix design, the RAS shall not be used in Hot- Mix Asphalt unless the RAS representing those tests is removed from the stockpile.
This work shall consist of designing, producing and constructing Warm Mix Asphalt (WMA) in lieu of Hot Mix Asphalt (HMA) at the Contractor’s option.
Comply with Section 39, "Hot Mix Asphalt," of the Standard Specifications.
Material Certification - A Material Certification shall be submitted prior to construction, stating the type of modifier being used, and the recommended mixing and compaction temperatures for the Hot Mix Asphalt.
Tack coat must comply with Section 39, "Hot Mix Asphalt," of the Standard Specifications.
The allowable drop in temperature shall be a maximum of 40°F below the producer’s recommended production temperature for Hot Mix Asphalt (HMA), or less as required during production to achieve proper laydown and compaction properties.
This special provision describes the Hot Mix Asphalt (HMA) density and volumetric testing tolerances required for an HMA test strip.
Design a mixture using a WMA Technology in accordance with MM 5.16, Superpave Hot Mix Asphalt Mixture Design and Mixture Verification Procedure.
Material Certification - A Material Certification shall be submitted prior to construction stating, the type of modifier being used, and the recommended mixing and compaction temperatures for the Hot Mix Asphalt.
The Contractor may place Hot Mix Asphalt Pavement as traveled way wearing course in Zone 1 between the dates of May 1st and the Saturday following October 1st and in Zone 2 between the dates of April 15th and the Saturday following October 15th, provided the air temperature determined as above is 10°C [50°F] or higher.