Horizontal distance definition

Horizontal distance means the distance between two points measured at a zero percent slope.
Sample 1Sample 2Sample 3
Horizontal distance means the distance between two points measured at a 0% slope.
Sample 1Sample 2Sample 3
Horizontal distance means the distance between two points meas- ured at a zero percent slope.
Sample 1Sample 2Sample 3

Examples of Horizontal distance in a sentence

  • Horizontal distance is measured from the station’s antenna to the closest point on the transmission line.

  • Legend:Dimension X - Horizontal distance between hinge axis of the door and the rear axle of the motor.

  • EXTERNAL UNLOCK QUOTA A • Vertical distance between the center of the hinge and the center of the motor shaft.QUOTA B • Horizontal distance between the center of the hinge and the center of the motor shaft.

  • Horizontal distance between centers, 4 1/8 in.; inside diameter of tubes, 2.782 in.; thickness of tubesheets 11/16 in.; distance from tubesheet to opposite combustion−chamber sheet, 34¼ in.; measured from outside of tubesheet to outside of backplate; material, steel.

  • Horizontal distance between the vertical bars of the grate shall be approximately six (6) inches.

  • Horizontal distance of flaw shown on screen of the equipment shall be observed.

  • Vertical -The minimum lengths for vertical curves on the various street types are shown below: Street"K" FactorCrest Curve"K" FactorSag CurveClassification Minimum*Desirable**Minimum*Desirable**Local *Horizontal distance in feet required to effect a one (1.0) percent change in grade, where: AK = Lwhere L = Horizontal length in feet of parabolic vertical curve.

  • Student will be able to learn and understand the various basic concept and principles used in surveying like Chain Surveying, Compass Surveying, Plane Table Surveying, and Levelling Surveying.2. Student will be able to learn and understand various instrument used in surveying.3. Student will learn and understand how to calculate Area of plot and Ground.4. Student will learn and understand about Horizontal Angle, Vertical Angle, Horizontal distance and Vertical distance to study the ground profile.

  • Horizontal distance beginning at the end of and at the elevation of the primary surface and sloping upward from the end of the primary surface.

  • Following guidelines as given in IS 456 shall be followed in case of difficulties or shall be carried out as directed by the EIC.a) Horizontal distance between two parallel main reinforcing bars shall usually not be less than the greatest of the following.


More Definitions of Horizontal distance

Horizontal distance means the distance between two points measured at a zero percent slope. "Hyporheic" means an area adjacent to and below channels where interstitial water is exchanged with channel water and water movement is mainly in the downstream direction.
Sample 1Sample 2Sample 3

Related to Horizontal distance

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Water Surface Elevation (WSE means the height, in relation to NAVD 1988, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • at a distance means that the service is provided without the parties being simultaneously present;

  • Basal area means the effective surface area available to transmit the treated effluent from the filter media in a mound system into the in-situ receiving soils. The perimeter is measured at the interface of the imported fill material and in-situ soil. On sloping sites, only the area down-gradient from the up-slope edge of the distribution media may be included in this calculation.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Modular building means, but shall not be limited to, single and multifamily houses, apartment

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;