Code of Forest Practices for Timber Production definition

Code of Forest Practices for Timber Production means the Code of Forest Practices for Timber Production Revision No 2 1996 developed in accordance with the Conservation, Forest and Lands Act 1987 (Vic);
Sample 1Sample 2Sample 3

Examples of Code of Forest Practices for Timber Production in a sentence

  • Code Prescription refers to areas protected under the Code of Forest Practices for Timber Production prescriptions for exclusion of timber harvesting from streamside buffers and slopes of 30 degrees or more.

  • The Agreement recognises that further protection is afforded to old growth forest values outside of the formal and informal CAR reserve elements through areas identified by the Code of Forest Practices for Timber Production prescriptions for exclusion of timber harvesting from streamside buffers and slopes of 30 degrees or more.

  • The Victorian Code of Forest Practices for Timber Production, and associated forest management prescriptions require the establishment of buffers and filters along streams and water courses, establish limitations on harvesting on steep slopes and design standards and planning procedures for road construction and stream crossings.

  • In general, timber is harvested according to a set of local prescriptions which are consistent with the Code of Forest Practices for Timber Production, but which incorporate local considerations necessary to achieve environmental care.

  • Protection through the prescription component is effected through implementation of the Code of Forest Practices for Timber Production.

  • Harvesting in this area will take into account the need to maintain the structural and floristic diversity of the forest, consistent with the Code of Forest Practices for Timber Production.

  • The Agreement recognises that further protection is afforded to old growth forest values outside the formal and informal CAR reserve elements through areas identified by the Code of Forest Practices for Timber Production prescriptions for exclusion of timber harvesting from streamside buffers and slopes of 30 degrees or more.

  • Cool Temperate Rainforest is not included in this table and is completely protected on public land; all occurrences on State forest are protected by Special Protection Zone or the Code of Forest Practices for Timber Production.

  • In addition to these activities, Victoria agrees to publish future reports of audits of compliance with the Code of Forest Practices for Timber Production.

  • All remaining rainforest stands are protected in the prescription component of the SPZ through the implementation of the Code of Forest Practices for Timber Production.

Related to Code of Forest Practices for Timber Production

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Certificate of Catholic Practice means a certificate issued by the family’s parish priest (or the priest in charge of the church where the family attends Mass) in the form laid down by the Bishops’ Conference of England and Wales. It will be issued if the priest is satisfied that at least one Catholic parent or carer (along with the child, if he or she is over seven years old) have (except when it was impossible to do so) attended Mass on Sundays and holy days of obligation for at least five years (or, in the case of the child, since the age of seven, if shorter). It will also be issued when the practice has been continuous since being received into the Church if that occurred less than five years ago. It is expected that most Certificates will be issued on the basis of attendance. A Certificate may also be issued by the priest when attendance is interrupted by exceptional circumstances which excuse from the obligation to attend on that occasion or occasions. Further details of these circumstances can be found in the guidance issued to priests http://rcdow.org.uk/education/governors/admissions/

  • Forest practice means any activity conducted on or directly pertaining to forest land and relating to growing, harvesting, or processing timber, including but not limited to:

  • Plant Genetic Resources for Food and Agriculture means any genetic material of plant origin of actual or potential value for food and agriculture.

  • Good Manufacturing Practices or “GMP” shall mean the then current Good Manufacturing Practices as such term is defined from time to time by the FDA or other relevant Governmental Authority having jurisdiction over the development, manufacture or sale of the Product in the Territory pursuant to its regulations, guidelines or otherwise.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Practice of medicine or osteopathic medicine means the prevention, diagnosis and treatment of

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Current Good Manufacturing Practices or “cGMP” means applicable Good Manufacturing Practices as specified in the United States Code of Federal Regulations and/or the EU Good Manufacturing Guidelines, and any successor legislation from time to time, prevailing at the time of the manufacture of the Product.

  • Good Engineering Practice means, Works carried out in accordance with the following standards/ specifications,

  • railway operational procedures means procedures specified under any access agreement (as defined in the Railways Act 1993) or station lease;

  • Code of Practice means the code of practice for protecting the interests of users of railway passenger services or station services who have disabilities, as prepared, revised from time to time and published by the Secretary of State pursuant to Section 71B of the Act;

  • Best Practices means a term that is often used inter-changeably with “evidence- based practice” and is best defined as an “umbrella” term for three levels of practice, measured in relation to Recovery-consistent mental health practices where the Recovery process is supported with scientific intervention that best meets the needs of the Client at this time.

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Rules of order and procedure means a set of rules that govern and prescribe in a public meeting:

  • Supply Pipe means any part of a service pipe which a water undertaker could not be, or have been required to lay under section 46 of the Water Industry Act 1991; and

  • Community practice protocol means a written, executed agreement entered into voluntarily between an authorized pharmacist and a physician establishing drug therapy management for one or more of the pharmacist’s and physician’s patients residing in a community setting. A community practice protocol shall comply with the requirements of subrule 8.34(2).

  • Policies and Procedures means the written policies and procedures of the Client in any way related to the Services, including any such policies and procedures contained in the Organic Documents and the Offering Documents.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Best Practice means solutions, techniques, methods and approaches which are appropriate, cost-effective and state of the art (at Member State and sector level), and which are implemented at an operational scale and under conditions that allow the achievement of the impacts set out in the award criterion ’Impact’ first paragraph (see below).

  • Geneva Convention means the Convention of 28 July 1951 relating to the status of refugees, as amended by the New York Protocol of 31 January 1967;

  • Good Manufacturing Practice or “GMP” means the current good manufacturing practices applicable from time to time to the manufacturing of a Product or any intermediate thereof pursuant to Applicable Law.

  • Warsaw Convention means the Convention for the Unification of Certain Rules Relating to International Carriage by Air, signed at Warsaw, October 12, 1929, as amended, but not including the Montreal Convention as defined above.

  • Best Management Practices (BMPs means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the state. BMPs also include treatment requirements, operating procedures, and practices to control site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;