Annual heat input definition

Annual heat input means the heat input, measured in mil- lions of British thermal units, from all boilers under the ownership or control of a major utility in a given year.
Annual heat input means the total heat input of fuels burned by a unit in a calendar year, as determined from the higher heating value and cumulative annual usage of each fuel.
Annual heat input means the actual, total heat input of fuels burned by a unit in a calendar year, as determined from the higher heating value and cumulative annual usage of each fuel. Annual heat input shall not include the heat input from fuels used during natural gas curtailment, during an emergency, or during equipment testing for the purpose of maintaining the fuel oil back-up system.

Examples of Annual heat input in a sentence

  • Annual heat input means the heat input for the 12 months preceding the compliance demonstration.

  • Annual heat input basis means the heat input for the 12 months preceding the compliance demonstration.

  • Annual heat input means the heat input for the 12 months preceding the compliance demonstration.Average annual heat input rate means total heat input divided by the hours of operation for the 12 months preceding the compliance demonstration.Bag leak detection system means a group of instruments that are capable of monitoring particulate matter load- ings in the exhaust of a fabric filter (i.e., baghouse) in order to detect bag failures.

  • From a theory of revolution to the management of a fragile state.Development Update, Vol.

  • Annual heat input shall not include the heat input fromemergency fuel combusted during natural gas curtailments and natural gas emergencies or emergency fuel combusted for purposes of testing, reliability, training, and maintenance as long as the usage limits in Sections 104.2 and 104.3 are not exceeded.

  • Annual heat input based on 8760 hours per year of operation of the combustion turbine at an average ambient temperature of 68oF with evaporative cooling on and a duct burner firing at 681.5 MMBtu/hr for 8760 hours per year.

  • Environmental Protection Agency § 63.7575 Annual heat input means the heat input for the 12 months preceding the compliance demonstration.Average annual heat input rate means total heat input divided by the hours of operation for the 12 months preceding the compliance demonstration.Bag leak detection system means a group of instruments that are capable of monitoring particulate matter load- ings in the exhaust of a fabric filter (i.e., baghouse) in order to detect bag failures.

  • Annual heat input from each type of fuel listed in Table C–2 of this sub- part that was combusted during the re- porting year, expressed in mmBtu.

  • Annual heat input from #6 Fuel Oil (Multiply line 2 by 0.15)………..

  • Annual heat input of gas flared is based on operating 365 days/year.


More Definitions of Annual heat input

Annual heat input means the heat input for the
Annual heat input means the heat input for the 12 months preceding the compliance demonstration.

Related to Annual heat input

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Annual Enrollment Period or "Enrollment Period" means the period before each policy anniversary so designated by the Sponsor and Lincoln during which you may enroll for coverage under this policy.

  • Planning Period means the 12 moths beginning June 1 and extending through May 31 of the following year, or such other period approved by the Members Committee.

  • Transit Service means the delivery of Transit Traffic.

  • LOCKHEED XXXXXX Procurement Representative means a person authorized by LOCKHEED XXXXXX'x cognizant procurement organization to administer and/or execute this Contract.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Basic generation service or "BGS" means electric generation

  • Net metering period means the 12-month period following the date of final interconnection of the

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating condition. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • Service Year means fiscal year, except that: