Rotary shaft seals Sample Clauses

Rotary shaft seals. Especially designed or prepared rotary shaft seals, with seal feed and seal exhaust connections, for sealing the shaft connecting the compressor rotor or the gas blower rotor with the driver motor so as to ensure a reliable seal against out-leakage of process gas or in-leakage of air or seal gas into the inner chamber of the compressor or gas blower which is filled with a UF6/carrier gas mixture.
Sample 1Sample 2See All (5)
AutoNDA by SimpleDocs
Rotary shaft seals. Especially designed or prepared rotary shaft seals, with seal feed and seal exhaust connections, for sealing the shaft connecting the compressor rotor or the gas blower rotor with the driver motor so as to ensure a reliable seal against out- leakage of process gas or in-leakage of air or seal gas into the inner chamber of the compressor or gas blower which is filled with a UF6/carrier gas mixture.
Sample 1

Related to Rotary shaft seals

  • DHS Seal, Logo, and Flags The Contractor shall not use the Department of Homeland Security (DHS) seal(s), logos, crests, or reproductions of flags or likeness of DHS agency officials without specific FEMA pre-approval.

  • ROAD DIMENSIONS Purchaser shall perform road work in accordance with the dimensions shown on the TYPICAL SECTION SHEET and the specifications within this road plan.

  • Professional Seal Where applicable in the determination of the City, the first page of a technical report, first page of design specifications, and each page of construction drawings shall be stamped/sealed and signed by the licensed professional responsible for the report/design preparation.

  • Check Meters Developer, at its option and expense, may install and operate, on its premises and on its side of the Point of Interconnection, one or more check meters to check Connecting Transmission Owner’s meters. Such check meters shall be for check purposes only and shall not be used for the measurement of power flows for purposes of this Agreement, except as provided in Article 7.4 below. The check meters shall be subject at all reasonable times to inspection and examination by Connecting Transmission Owner or its designee. The installation, operation and maintenance thereof shall be performed entirely by Developer in accordance with Good Utility Practice.

  • Names of Stewards The Union shall notify the Employer in writing of the name of each Xxxxxxx and the area the Xxxxxxx represents and the name of the Chief Xxxxxxx, before the Employer shall be required to recognize the Xxxxxxx.

  • Road Surfaces (1) Grade, shape, crown, and/or outslope surface and shoulders.

  • Smoke Detectors At Owner's expense, smoke detectors will be installed on the Property in working condition in accordance with the law prior to the tenant's occupancy. During the occupancy, it shall be the tenant's responsibility to maintain all smoke detectors. Owner will replace smoke detector equipment as needed.

  • STOPWORK MEETINGS 30.1 Subject to subsections 30.2 to 30.5, the employer shall allow every employee covered by this Agreement to attend, on ordinary pay, at least two meetings (each of a maximum of two hours' duration) in each year (being the period beginning on the 1st day of January and ending on the following 31st day of December) with their representatives.

  • Vaccine Passports Pursuant to Texas Health and Safety Code, Section 161.0085(c), Contractor certifies that it does not require its customers to provide any documentation certifying the customer’s COVID-19 vaccination or post-transmission recovery on entry to, to gain access to, or to receive service from the Contractor’s business. Contractor acknowledges that such a vaccine or recovery requirement would make Contractor ineligible for a state-funded contract.

  • File Naming Conventions Files will be named according to the following convention: {gTLD}_{YYYY-­‐MM-­‐DD}_{type}_S{#}_R{rev}.{ext} where:

Time is Money Join Law Insider Premium to draft better contracts faster.