FLASH POINT Sample Clauses

FLASH POINT. The specified minimum Flash Point for Fuel Oils provided under this contract shall be as specified in Table I and Table II, elsewhere herein, for the respective fuel oil being provided. Delivered product having a flash point below that specified in Table I or Table II, but not greater than twenty (20) degrees Fahrenheit less shall be adjusted in price as specified elsewhere herein for NON-COMPLYING PRODUCT. Delivered product having a flash point greater than twenty (20) degrees Fahrenheit below that specified shall be removed from the purchasing agency’s tank and replaced with product conforming to specifications. The Flash Point shall be determined using ASTM Test Method D93 (IP #34/85), latest revision thereof.
AutoNDA by SimpleDocs
FLASH POINT. The specified minimum Flash Point for Fuel Oils provided under this contract shall be: 120°F for 1D; 122°F for 2PD/1D and 2D/1D (50/50 blend); and 125°F for 2D and 2PD. Delivered product having a flash point below the respective requirement given above, shall be adjusted in price as stated elsewhere herein for NON-COMPLYING PRODUCT. Delivered product having a flash point greater than ten (10°F) degrees Fahrenheit below the specified minimum shall be removed from the purchasing agency’s tank and replaced with product conforming to specifications. The Flash Point shall be determined using ASTM Test Method D93-11 (IP #34/85), or latest revision thereof, Flash Point by Xxxxxx-Xxxxxxx Closed Tester.
FLASH POINT. Delivered product having a flash point below the respective requirement given in Physical and Chemical Requirements Table shall be adjusted in price as detailed in the NON-COMPLYING PRODUCT & OPERABILITY TABLE FOR PRICE DEDUCTIONS. Delivered product having a flash point greater than ten (10°F) degrees Fahrenheit below the specified minimum shall be removed from the purchasing agency’s tank and replaced with product conforming to specifications.
FLASH POINT. The thermoplastic material shall have a flash point not less than 475 degrees F when tested in accordance with ASTM D92.
FLASH POINT. The flash point of a fuel is the temperature at which fuel vapors will flash when ignited by an external flame. The flash point is regulated for safety in fuel handling and storage. By itself it is not critical to turbine operation although it can affect the requirements for auxiliary equipment such as motors, relays, heaters, etc. Minimum permissible flash points are regulated by local, state or federal laws. Explosion-proofing of equipment may be required by local, state or federal regulations or other applicable codes when the flash point is below a minimum permissible value.

Related to FLASH POINT

  • Speed The relative importance we attach is “high”.

  • Delivery Point (a) All Energy shall be Delivered hereunder by Seller to Buyer at the Delivery Point. Seller shall be responsible for the costs of delivering its Energy to the Delivery Point consistent with all standards and requirements set forth by the FERC, ISO-NE, the Interconnecting Utility and any other applicable Governmental Entity and any applicable tariff.

  • Fuel 28.1 The Vehicle must be returned with the amount of fuel equal to that at the time of the commencement of the rental. If the Vehicle is returned with less fuel, the difference will be charged to You at a rate of $5.00 including GST per litre (which includes a service component).

  • Floor Loading Floor loading capacity shall be within building design capacity. Tenant may exceed floor loading capacity with Landlord’s consent, at Landlord’s sole discretion and must, at Tenant’s sole cost and expense, reinforce the floor as required for such excess loading.

  • Delivery Points ‌ Project water made available to the Agency pursuant to Article 6 shall be delivered to the Agency by the State at the delivery structures established in accordance with Article 10.

  • Temperature Where low temperature and/or self-service cases are used for any of such merchandise coming under the jurisdiction of the Union, such cases shall be served only by employees covered by this Agreement.

  • Plant The expression ‘Plant’ as used in the tender papers shall mean every temporary accessory necessary or considered necessary by the Engineer to execute, construct, complete and maintain the work and all altered, modified, substituted and additional works ordered in the time and the manner herein provided and all temporary materials and special and other articles and appliance of every sort kind and description whatsoever intended or used therefore.

  • Production Lessee shall, subject to applicable laws, regulations and orders, operate and produce all xxxxx upon the leased land so long as the same are capable of producing in paying quantities, and shall operate the same so as to produce at a rate commensurate with the rate of production of xxxxx on adjoining lands within the same field and within the limits of good engineering practice, except for such times as there exist neither market nor storage therefore, and except for such limitations on, or suspensions of, production as may be approved in writing by Lessor. Lessee shall be responsible for adequate site security on all producing properties.

  • Underground Storage Tanks In accordance with the requirements of Section 3(g) of the D.C. Underground Storage Tank Management Act of 1990, as amended by the District of Columbia Underground Storage Tank Management Act of 1990 Amendment Act of 1992 (D.C. Code § 8-113.01, et seq.) (collectively, the “UST Act”) and the applicable D.C. Underground Storage Tank Regulations, 20 DCMR Chapter 56 (the “UST Regulations”), District hereby informs the Developer that it has no knowledge of the existence or removal during its ownership of the Property of any “underground storage tanks” (as defined in the UST Act). Information pertaining to underground storage tanks and underground storage tank removals of which the D.C. Government has received notification is on file with the District Department of the Environment, Underground Storage Tank Branch, 00 X Xxxxxx, X.X., Xxxxx Xxxxx, Xxxxxxxxxx, X.X., 00000, telephone (000) 000-0000. District’s knowledge for purposes of this Section shall mean and be limited to the actual knowledge of Xxxxxx Xxxxx, Property Acquisition and Disposition Division of the Department of Housing and Community Development, telephone no. (000) 000-0000. The foregoing is set forth pursuant to requirements contained in the UST Act and UST Regulations and does not constitute a representation or warranty by District.

Time is Money Join Law Insider Premium to draft better contracts faster.