Control Panels Sample Clauses

Control Panels a. Visually inspect the control panel, relay contacts and connectors
Sample 1Sample 2
AutoNDA by SimpleDocs
Control Panels. This section covers the design, fabrication and installation of floor and wall mounted control panels for the project.
Sample 1Sample 2
Control Panels. Lamps should be provided to indicate running and tripped conditions, normal and fault conditions, pressurisation unit fault, frost thermostat operation etc. as appropriate to indicate the status of all plant being controlled via the panel. These lamps shall be LED type and coloured green for normal or run status, and red for fail or fault status. Further information about lamp colours may be found in BSEN 60204-1:2018. Panel indicator lamps shall be Xxxxxxxxx Electric, Harmony LED series XB4, 24v AC for control circuits, 240v ac Mains.
Sample 1
Control Panels. 3.15.4.1 Panels shall be provided for control and monitoring of the machine and shall be sized to take environmental conditions into account. The panel shall be dust & water splash tight & the ambient temperature outside may go up to 45 deg. C. The IP level for the control panel shall be at least IP55.
Sample 1
Control Panels. A. All control panels, factory, shop or field assembled, shall be labeled as a unit in accordance with UL 508. The UL 508 label shall be affixed to the inside of the door or cover, adjacent to the data pocket.
Sample 1
Control Panels. 1. The control panels to be provided for the Multi-rake Bar Screen Package Control Systems shall
Sample 1
Control Panels. The modular nature of the G05 assembly cell dictates the use of numerous small electrical panels instead of a single large panel. The single process module G05 has 5 control panels. A double process module G05 has 8 control panels. In the second process module of a Double G05, there are up to three empty electrical panels available for optional equipment. [*]
Sample 1
AutoNDA by SimpleDocs
Control Panels. 2.9.1 MyAccount Ziggo provides web-based account and server management tools on xxxxxxxxxxxxx.xx/xxxxxxxxxxxxx The control panels are designed to give the Customer control over its account and many services such as adding, removing and editing user details, switching plans and configuring websites. The Customer can use the control panels to perform most of the routine account and server management tasks.
Sample 1

Related to Control Panels

  • Majority Control Except as expressly provided herein, any action that may be taken by the Certificateholders under this Trust Agreement may be taken by the Holders of Certificates evidencing not less than a majority Percentage Interest of the Certificates. Except as expressly provided herein, any written notice of the Certificateholders delivered pursuant to this Trust Agreement shall be effective if signed by Holders of Certificates evidencing not less than a majority Percentage Interest of the Certificates at the time of the delivery of such notice.

  • Control Notwithstanding any other provision of the Agreement, it is understood and agreed that the Trust shall at all times retain the ultimate responsibility for and control of all functions performed pursuant to this Agreement and has reserved the right to reasonably direct any action hereunder taken on its behalf by the Sub-Adviser.

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time.

Time is Money Join Law Insider Premium to draft better contracts faster.