CONSTRUCTION SPECIFICATIONS. Parties agree that all construction under the STP for the City will be constructed in accordance with current MoDOT design criteria/specifications for urban construction unless separate standards for the surface transportation system have been established by the City and the Commission subject to the approval of the FHWA.
CONSTRUCTION SPECIFICATIONS. The Unit and the Condominium will be constructed in substantial accordance with the plans and specifications therefor kept in Seller's construction office, as such plans and specifications are amended from time to time. Seller may make such changes in the plans and specifications that it deems appropriate at any time, to accommodate its in the field construction needs (as more fully discussed in this Section 14 and in response to recommendations or requirements of local, state or federal governmental or quasi-governmental agencies or applicable utility and/or insurance providers or Seller’s design professionals and/or contractors or suppliers. Such plans and specifications, as they are so amended, are referred to in this Agreement as “Seller’s Plans and Specifications”. Without limiting Seller’s general right to make changes, Buyer specifically agrees that the changes described above and changes in the location of utility (including, but not limited to, television and telephone) lead-ins and outlets, air-conditioning equipment, ducts and components, lighting fixtures and electric panel boxes, may be made by Seller in its discretion. In furtherance of the understanding and agreement stated above, Buyer acknowledges and agrees that it is a widely observed construction industry practice for pre-construction plans and specifications for any unit or building to be changed and adjusted from time to time in order to accommodate on-going, “in the field” construction needs. These changes and adjustments are essential in order to permit all components of the Unit and the Building to be integrated into a well-functioning and aesthetically pleasing product in an expeditious manner. Because of the foregoing, Buyer acknowledges and agrees that it is to Buyer’s benefit to allow Seller the flexibility to make such changes in the Unit and the Condominium. Buyer further acknowledges and agrees that (i) the plans and specifications for the Unit and the Condominium on file with the applicable governmental authorities may not, initially, be identical in detail to Seller’s Plans and Specifications, and (ii) because of the day-to-day nature of the changes described in this Section 14, the plans and specifications on file with applicable governmental authorities may not include some or any of these changes (there being no legal requirement to file all changes with such authorities). As a result of the foregoing, Buyer and Seller both acknowledge and agree: The Unit and the Condom...
CONSTRUCTION SPECIFICATIONS. 4.1. The Promoter has constructed and/or agreed to construct/cause to construct the Joyville Phase 1A on the Project Land or on part thereof as per the sanctioned Building Plan and as per the specifications mentioned in the Sixth Schedule hereunder written
CONSTRUCTION SPECIFICATIONS. In the specification, we will use the notation ctv to refer to the ciphertext stored in M at the node v of τeram. The details of the scheme are as follows: – (M, MK) ← eram-init(1λ) initializes the public cells M with ⊥, and MK ← ⊥. – d ← eram-read(M, MK, i) fetches the direct path of cell i from the server and performs the following: ←
CONSTRUCTION SPECIFICATIONS. Developer shall comply with the following in construction of the Sewer Extension.
CONSTRUCTION SPECIFICATIONS. 4.1. The Promoter has constructed and/or agreed to construct/cause to construct the Xxxxxxxx Xxxxx 0X on the Project Land or on part thereof as per the sanctioned Building Plan and as per the specifications mentioned in the Sixth Schedule hereunder written
CONSTRUCTION SPECIFICATIONS. All civil engineering construction work shall comply with the requirements of SANS 1200: Standard Specification for Civil Engineering Construction. All steel materials supplied and erection of the steelwork shall comply with the requirements of SANS 2001 – CS1: Latest version. All buildings shall comply with the requirements of SANS 10400: National Building Regulations. All buildings work shall comply with the requirement of the Model Preamble for Trades (1997) as issued by the Association of South African Quantity Surveyors.
CONSTRUCTION SPECIFICATIONS a. Due consideration for appropriate setback distances from intersections and obstructions causing a visibility hazard must be given;
CONSTRUCTION SPECIFICATIONS. Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects, FP-14 U.S. Cur,tomary Units, shall apply to this contract
CONSTRUCTION SPECIFICATIONS. 6.1. BPHDCL shall construct the said Project in accordance with the sanctioned Building Plan and as per the Specifications mentioned in the ‘Fifth Schedule’ hereunder written.
