Completion of Installation. Supplier shall complete the installation services in accordance with Supplier's normal installation practices. Supplier shall perform its standard acceptance testing on the installed Equipment and Customer agrees to monitor said testing. Upon completion thereof, as described above, Supplier shall notify Customer the Equipment has been installed and operates in accordance with applicable test and performance specifications. The date of such notification shall be the installation date. Supplier may at its sole discretion use subcontractors to provide installation services.
Completion of Installation. Company will use commercially reasonable efforts to complete installation of Services at your premise within any agreed-upon timeframes. Installation will be complete if the post-installation performance check that we conduct confirms that an end-user at you may properly access the Company network via the Services. If we determine that the test is successful, we consider you as "In Service” and we will begin billing you as of that “In Service” date.
Completion of Installation. Installation will be complete upon the conclusion of final calibration and checkout under Seller standard procedures to verify that the Products meet applicable written performance specifications. Notwithstanding the foregoing, first use of the Products by Purchaser, its agents or employees for any purpose after delivery will constitute completion of installation.
Completion of Installation. Licensee must commence installation of a Small Wireless Installation within 6 months of receipt of Permit hereunder and must complete such installation within one year of receipt of such Permit, or such Permit shall lapse. Upon request, Licensor will grant Licensee an extension of up to six (6) months each of the commencement and completion deadlines. Licensee may not use Permits to reserve space for long periods of time and interfere with third party efforts to make similar installations. Within twenty (20) business days of completing the installation of each Small Wireless Installation, Licensee shall notify Licensor of such completion.
Completion of Installation. Within a reasonable time to any Buyer facility, automobile bodily injury and property damage after installation, authorized representatives of Seller and Buyer will liability insurance covering owned, non-owned and hired inspect the Product for conformity with the order and for defects or automobiles, the limits of which will not be less than $1,000,000 combined single limit per occurrence; (iii) employer's liability subrogation rights against Xxxxx and Xxxxx’s landlord or property insurance, the limits of which will not be less than $1,000,000; (iv) manager, except to the extent loss or damage is caused solely by workers’ compensation insurance as prescribed by applicable law; Buyer or Buyer landlord or property manager; (d) provide primary, and (v) umbrella/excess coverage in the amount of $4,000,000 per non-contributory coverage to additional insureds to the extent loss occurrence. With respect to the coverage described in (i), (ii), and or damage results from products or services under the Agreement;
Completion of Installation. Notwithstanding anything in this Agreement to the contrary, If the installation of the Licensee's Equipment, or any other work proposed by the Licensee, may affect the structure or any of the mechanical, electrical, HYAC or other basic .systems of the Building or the capacities thereof, and if Sl!Ch installation or other work is approved by the Licensor, the Licensor may require that such work be designed by consultants designated by it and paid by the Licensee and that it be performed by the Licensor or its contractors. If the Licensor or its contractors perform such work, it shall be at the Licensee's expense in an amount equal to the Licensor's total cost of such work or the contract price therefor plus, in either case, 15 payable following completion upon demand.
Completion of Installation. The installation shall be deemed as completed in the following situations:
Completion of Installation. The actual loading, configuration, and verification of the Software on Your hardware is completed. The implementation manager responsible for loading the Software will contact Your information services representative during or immediately after the completion of the Software load to request written verification (e-mail is acceptable) that the Software load has occurred, the load included all of the Software licensed by You under the Agreement, and functional testing was successfully completed.
Completion of Installation. Before the commencement of any test or commissioning procedures, the Contractor is to ensure that all nuts and bolts are securely fastened, and that paintwork on all items supplied has been touched up where damage has occurred.
Completion of Installation. All Cable authorized by a License for attachment to APS Facilities shall be installed and ready for use within one hundred twenty (120) days from the date of APS’ authorization for attachments provided. If construction is not completed within one hundred twenty (120) days, APS may require an additional field survey, at MTI’s expense, to determine any changes in the field that would impact Make Ready Work requirements.
